暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料（保険付き）。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料（保険付き）。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン
Green circuit board with black memory chips and gold edge connector

NEMIX RAM

NEMIX RAM 16GB DDR5 4800 CL40 1Rx8 1.1V ECC RDIMM Supermicro H13DSG-OM memory upgrade

SKU CH-2W4Z-TZA7M

16 GB DDR5 ECC registered DIMM at 4800 MHz with CL40 latency and 1.1 V for Supermicro H13DSG-OM servers

  • Capacity16GB
  • Type288-Pin DDR5 RDIMM
  • SpeedDDR5 4800 (PC5 38400)
  • CAS LatencyCL40
  • Voltage1.10V
  • ECCYes

Size 16GB

他に 30点の構成を表示
  • 16 GB DDR5 4800 CL40 1.1 V ECC RDIMM for full rated speed
  • Registered 1Rx8 design offloads the controller for stable full-population operation
  • ECC corrects single-bit errors on the fly to prevent silent data corruption
  • 288-pin RDIMM form factor matches the Supermicro H13DSG-OM memory slots exactly
  • Built with major OEM Samsung, Micron or Hynix chips for enterprise reliability

Exact-match DDR5 RDIMM for Supermicro H13DSG-OM

This 16GB DDR5 4800 module delivers PC5-38400 speed at CL40 with 1.10V operation. It uses a 1Rx8 registered ECC design on a 288-pin form factor built for the Supermicro H13DSG-OM motherboard.

Registered ECC architecture and verified fitment

Registered buffering offloads the memory controller so every populated slot runs at full capacity. ECC corrects single-bit errors on the fly to prevent silent data corruption. The module matches the board's population rules and 288-pin RDIMM requirement exactly.

Suits admins upgrading the H13DSG-OM platform

Ideal for administrators adding capacity to a Supermicro H13DSG-OM server that requires registered DDR5 ECC memory. Not for systems that accept only unbuffered UDIMMs or SODIMM form factors. Buyers needing higher per-module density or different voltage specifications should verify their motherboard manual before purchase.

特長

  • 16 GB DDR5 4800 CL40 1.1 V ECC RDIMM for full rated speed
  • Registered 1Rx8 design offloads the controller for stable full-population operation
  • ECC corrects single-bit errors on the fly to prevent silent data corruption
  • 288-pin RDIMM form factor matches the Supermicro H13DSG-OM memory slots exactly
  • Built with major OEM Samsung, Micron or Hynix chips for enterprise reliability

仕様

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Server Memory
ModelDDR5 ECC RDIMM Registered Server Memory
Part NumberMR38400-618K1
Capacity16GB
Type288-Pin DDR5 RDIMM
SpeedDDR5 4800 (PC5 38400)
CAS LatencyCL40
Voltage1.10V
ECCYes
Buffered/RegisteredRegistered
Rank1Rx8
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemSupermicro
FeaturesDDR5 ECC RDIMM Motherboard Compatible
Package Content16GB DDR5 4800MHz PC5-38400 1Rx8 1.1V 288-PIN ECC RDIMM KIT

このモデルの他のバージョン

同シリーズにさらに 5点

同じファミリーで、メモリ・クーラー・クロックが異なります — 購入前に比較してください。

この商品に関する質問

Does the 1Rx8 ECC RDIMM require any periodic maintenance or component replacement during its service life?

No — the module has no moving parts, no heat spreader, and no user-serviceable components; once seated in the Supermicro H13DSG-OM it runs maintenance-free for its lifetime.

What is the first limit reached when the DDR5 4800 CL40 1.10V RDIMM runs sustained workloads on the H13DSG-OM?

The memory controller’s maximum supported speed of DDR5 4800 (PC5-38400) is the ceiling; the module cannot exceed that data rate regardless of load duration.

How much heat and power does the 16GB 288-pin registered ECC module produce when operating continuously at 1.1V?

It draws 1.1V at the rated DDR5 4800 speed with no heat spreader, so thermal output stays within standard RDIMM limits for the H13DSG-OM’s airflow design.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。