暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料（保険付き）。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料（保険付き）。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン
Green circuit board DDR5 RDIMM memory module with black chips no heat spreader 288 pins

NEMIX RAM

NEMIX RAM 16GB DDR5 5600MHz ECC Registered RDIMM Supermicro H14DST-FL memory upgrade

SKU CH-HGQ4-PKHDX

16 GB DDR5 5600 MHz ECC registered RDIMM for Supermicro H14DST-FL servers

  • Capacity16GB
  • Type288-Pin DDR5 RDIMM
  • SpeedDDR5 5600 (PC5 44800)
  • CAS LatencyCL46
  • Voltage1.10V
  • ECCYes

Size 16GB

他に 30点の構成を表示
  • Exact DDR5-5600 spec match for full-speed recognition
  • Registered ECC design prevents silent data corruption
  • 1Rx8 1.10V CL46 timing tuned for server stability
  • 288-pin RDIMM form factor fits Supermicro H14DST-FL
  • Lifetime replacement warranty with US-based technical support

Exact DDR5-5600 RDIMM for Supermicro H14DST-FL

This 16 GB registered ECC module matches the Supermicro H14DST-FL memory controller with 1Rx8 organisation, 1.1 V operation and CL46 timing. It is built for servers that require registered DDR5 DIMMs to run every slot at full rated speed.

288-pin registered form factor with ECC integrity

The 288-pin RDIMM fits only boards wired for registered DDR5; it will not seat in UDIMM or SODIMM sockets. On-board ECC corrects single-bit errors in flight while the registered buffer reduces electrical load on the memory controller when all channels are populated.

Upgrade from slower DDR5 or partial populations

Replacing lower-frequency DDR5 or partially filled banks restores full-channel bandwidth and ECC protection across the platform. The jump is worthwhile when the board manual confirms 5600 MT/s support at the target capacity and population order.

特長

  • Exact DDR5-5600 spec match for full-speed recognition
  • Registered ECC design prevents silent data corruption
  • 1Rx8 1.10V CL46 timing tuned for server stability
  • 288-pin RDIMM form factor fits Supermicro H14DST-FL
  • Lifetime replacement warranty with US-based technical support

仕様

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Server Memory
ModelDDR5 ECC RDIMM Registered Server Memory
Part NumberMR44800-618K1
Capacity16GB
Type288-Pin DDR5 RDIMM
SpeedDDR5 5600 (PC5 44800)
CAS LatencyCL46
Voltage1.10V
ECCYes
Buffered/RegisteredRegistered
Rank1Rx8
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemSupermicro
FeaturesDDR5 ECC RDIMM Motherboard Compatible
Package Content16GB DDR5 5600MHz PC5-44800 1Rx8 1.1V 288-PIN ECC RDIMM KIT

このモデルの他のバージョン

同シリーズにさらに 5点

同じファミリーで、メモリ・クーラー・クロックが異なります — 購入前に比較してください。

この商品に関する質問

What DDR5 speed and PC5 bandwidth does this RDIMM run at?

It operates at DDR5 5600 with a PC5-44800 data rate, matching the Supermicro H14DST-FL memory controller specification.

Does this module use the 288-pin Registered RDIMM form factor the board requires?

Yes, it is a 288-pin Registered RDIMM, not a UDIMM or SODIMM, so it fits the H14DST-FL DIMM slots directly.

What is the correct population order when installing multiple modules?

Consult the Supermicro H14DST-FL manual for the approved DIMM population sequence; installing in the wrong slots can prevent the system from recognising the full capacity.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。