Mēs pieņemam kriptovalūtu — lai tā, kas Jums pieder, varētu nopirkt īstu aparatūru.Maksājiet kriptovalūtā, iztērējiet to īstai aparatūrai. Bezmaksas apdrošināta piegāde visā pasaulē virs 399 $. Vienkāršas, nemarķētas kastes, sūtītas no Vācijas.Bezmaksas apdrošināta piegāde virs 399 $. Jūsu kurss tiek fiksēts uz 30 minūtēm, tiklīdz atveras kase.Kurss fiksēts uz 30 minūtēm. Katra prece ir aizzīmogota, tās sērijas numurs ir pārbaudīts, un uz to attiecas 24 mēnešu garantija.Aizzīmogots, 24 mēnešu garantija.

Uzraudzītās preces Pieteikties
Green circuit board DDR5 RDIMM memory module with black chips no heat spreader 288 pins

NEMIX RAM

NEMIX RAM 16GB DDR5 5600MHz ECC Registered RDIMM Supermicro H14DST-FL memory upgrade

SKU CH-HGQ4-PKHDX

16 GB DDR5 5600 MHz ECC registered RDIMM for Supermicro H14DST-FL servers

  • Capacity16GB
  • Type288-Pin DDR5 RDIMM
  • SpeedDDR5 5600 (PC5 44800)
  • CAS LatencyCL46
  • Voltage1.10V
  • ECCYes

Size 16GB

Skatīt vēl 30 konfigurācijas
  • Exact DDR5-5600 spec match for full-speed recognition
  • Registered ECC design prevents silent data corruption
  • 1Rx8 1.10V CL46 timing tuned for server stability
  • 288-pin RDIMM form factor fits Supermicro H14DST-FL
  • Lifetime replacement warranty with US-based technical support

Exact DDR5-5600 RDIMM for Supermicro H14DST-FL

This 16 GB registered ECC module matches the Supermicro H14DST-FL memory controller with 1Rx8 organisation, 1.1 V operation and CL46 timing. It is built for servers that require registered DDR5 DIMMs to run every slot at full rated speed.

288-pin registered form factor with ECC integrity

The 288-pin RDIMM fits only boards wired for registered DDR5; it will not seat in UDIMM or SODIMM sockets. On-board ECC corrects single-bit errors in flight while the registered buffer reduces electrical load on the memory controller when all channels are populated.

Upgrade from slower DDR5 or partial populations

Replacing lower-frequency DDR5 or partially filled banks restores full-channel bandwidth and ECC protection across the platform. The jump is worthwhile when the board manual confirms 5600 MT/s support at the target capacity and population order.

Priekšrocības

  • Exact DDR5-5600 spec match for full-speed recognition
  • Registered ECC design prevents silent data corruption
  • 1Rx8 1.10V CL46 timing tuned for server stability
  • 288-pin RDIMM form factor fits Supermicro H14DST-FL
  • Lifetime replacement warranty with US-based technical support

Specifikācijas

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Server Memory
ModelDDR5 ECC RDIMM Registered Server Memory
Part NumberMR44800-618K1
Capacity16GB
Type288-Pin DDR5 RDIMM
SpeedDDR5 5600 (PC5 44800)
CAS LatencyCL46
Voltage1.10V
ECCYes
Buffered/RegisteredRegistered
Rank1Rx8
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemSupermicro
FeaturesDDR5 ECC RDIMM Motherboard Compatible
Package Content16GB DDR5 5600MHz PC5-44800 1Rx8 1.1V 288-PIN ECC RDIMM KIT

Citas šī modeļa versijas

Vēl 5 šajā sērijā

Viena saime, taču atšķirīga atmiņa, dzesētājs vai frekvence — salīdziniet, pirms izlemjat.

Jautājumi par šo preci

What DDR5 speed and PC5 bandwidth does this RDIMM run at?

It operates at DDR5 5600 with a PC5-44800 data rate, matching the Supermicro H14DST-FL memory controller specification.

Does this module use the 288-pin Registered RDIMM form factor the board requires?

Yes, it is a 288-pin Registered RDIMM, not a UDIMM or SODIMM, so it fits the H14DST-FL DIMM slots directly.

What is the correct population order when installing multiple modules?

Consult the Supermicro H14DST-FL manual for the approved DIMM population sequence; installing in the wrong slots can prevent the system from recognising the full capacity.

Arī šajā sadaļā

Klienti arī salīdzināja

Tas pats plaukts, tā pati kase — astoņas kriptovalūtas un kursa fiksēšana uz 30 minūtēm.