NEMIX RAM DDR5 1TB 8x128GB 4800MHz CL40 2Rx4 ECC RDIMM Supermicro H13SSF
- 1TB (8 x 128GB)
- 288-Pin DDR5 RDIMM
NEMIX RAM
1TB DDR5 5600 ECC RDIMM kit with 16 × 64 GB modules, CL46, 1.1 V, 2Rx4, 288-pin, verified for Supermicro H13DSG-OM
Size 1TB 16X64GB
This 1TB kit contains sixteen 64GB DDR5 RDIMMs rated at 5600 MT/s with CL46 latency and 1.10V operation. Each module uses a 2Rx4 registered ECC design on a 288-pin form factor built with major OEM DRAM. It is engineered as an exact-match upgrade for the Supermicro H13DSG-OM motherboard where full population and registered signalling are required.
The registered buffer reduces electrical load on the memory controller so all sixteen slots can run at the rated 5600 speed without down-clocking. On-die ECC detects and corrects single-bit errors in real time, preventing silent data corruption and unplanned reboots during sustained workloads. Modules operate at the standard 1.10V DDR5 voltage and ship without heat spreaders, relying on server chassis airflow for cooling.
Install this kit when the board is running fewer than sixteen DIMMs, when installed modules are slower than 5600 MT/s, or when non-ECC UDIMMs are present and registered ECC is required. The upgrade is worth it only if the system manual confirms 1TB maximum capacity and the correct population sequence for sixteen 2Rx4 modules. Buyers who need a different capacity, a UDIMM form factor, or compatibility with another motherboard should not use this kit.
| Brand | NEMIX RAM |
|---|---|
| Series | NEMIX RAM Original Series Server Memory |
| Model | DDR5 ECC RDIMM Registered Server Memory |
| Part Number | MR44800-924K16 |
| Capacity | 1TB (16 x 64GB) |
| Type | 288-Pin DDR5 RDIMM |
| Speed | DDR5 5600 (PC5 44800) |
| CAS Latency | CL46 |
| Voltage | 1.10V |
| ECC | Yes |
| Buffered/Registered | Registered |
| Rank | 2Rx4 |
| Chipset | Major OEM Samsung, Micron, Hynix |
| Heat Spreader | No |
| Compatible System | Supermicro |
| Features | DDR5 ECC RDIMM Motherboard Compatible |
| Package Content | 1TB 16X64GB DDR5 5600MHz PC5-44800 2Rx4 1.1V 288-PIN ECC RDIMM KIT |
このモデルの他のバージョン
同じファミリーで、メモリ・クーラー・クロックが異なります — 購入前に比較してください。
Follow the motherboard manual for the exact 16-slot population order; the step most often missed is installing modules in the prescribed sequence per CPU socket rather than filling slots sequentially.
The modules have no moving parts and require no scheduled maintenance; replacement is only necessary if a DIMM fails, which is covered by the lifetime replacement warranty.
The registered ECC architecture is designed to keep every slot stable at full 5600 MT/s and 1.1V, so the practical limit encountered first is the motherboard's maximum supported capacity and population rules.
同じ売り場の商品
同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。
お支払いに使うコインと、価格表示に使う通貨です。
チェックアウト時にウォレットから送信されます。
表示のみ—カタログの価格は米ドル建てです。
該当する通貨がありません。
サイトの表示言語を選択してください。
一致する言語がありません。
初めてのご利用ですか?
すでにお持ちですか?
自動的な再設定はありません。当店はメールを送信しないため、ワンタイムリンクをお送りすることもできません。アカウントにメールアドレスを残しておいていただければ、担当者が手作業で確認いたします。
リクエストを受け付けました
受信箱に何かが届くことはありません — 当店はメールを一切送信していません。担当者が手作業で確認いたします。
思い出しましたか?