Akceptujemy kryptowaluty — posiadane środki można więc wykorzystać na zakup prawdziwego sprzętu.Płatność kryptowalutą — realny sprzęt w zamian. Bezpłatna, ubezpieczona dostawa na całym świecie powyżej 399 $. Neutralne kartony, bez oznaczeń, wysyłane z Niemiec.Bezpłatna, ubezpieczona dostawa powyżej 399 $. Kurs zostaje zablokowany na 30 minut od otwarcia kasy.Kurs zablokowany na 30 minut. Każdy produkt jest fabrycznie zapieczętowany, jego numer seryjny jest sprawdzany, a całość objęta jest 24-miesięczną gwarancją.Zapieczętowane fabrycznie, 24 miesiące gwarancji.

Obserwowane produkty Zaloguj się
Sixteen green DDR5 RDIMM modules in a row

NEMIX RAM

NEMIX RAM 1TB DDR5 5600 ECC RDIMM 16x64GB CL46 1.1V 2Rx4 288-pin Supermicro H13DSG-OM

SKU CH-R0T8-8NBQ7

1TB DDR5 5600 ECC RDIMM kit with 16 × 64 GB modules, CL46, 1.1 V, 2Rx4, 288-pin, verified for Supermicro H13DSG-OM

  • Capacity1TB (16 x 64GB)
  • Type288-Pin DDR5 RDIMM
  • SpeedDDR5 5600 (PC5 44800)
  • CAS LatencyCL46
  • Voltage1.10V
  • ECCYes

Size 1TB 16X64GB

Pokaż jeszcze 30 konfiguracji
  • 1TB kit (16 × 64 GB) for high-capacity server workloads
  • DDR5-5600 (PC5-44800) at CL46 for rated-speed operation
  • Registered ECC RDIMM with 2Rx4 rank for full-population stability
  • 10 V standard voltage for efficient power draw
  • 288-pin form factor matched to Supermicro H13DSG-OM motherboard

1TB DDR5-5600 ECC RDIMM kit for Supermicro H13DSG-OM

This 1TB kit contains sixteen 64GB DDR5 RDIMMs rated at 5600 MT/s with CL46 latency and 1.10V operation. Each module uses a 2Rx4 registered ECC design on a 288-pin form factor built with major OEM DRAM. It is engineered as an exact-match upgrade for the Supermicro H13DSG-OM motherboard where full population and registered signalling are required.

Registered ECC architecture for stable full-load

The registered buffer reduces electrical load on the memory controller so all sixteen slots can run at the rated 5600 speed without down-clocking. On-die ECC detects and corrects single-bit errors in real time, preventing silent data corruption and unplanned reboots during sustained workloads. Modules operate at the standard 1.10V DDR5 voltage and ship without heat spreaders, relying on server chassis airflow for cooling.

Replaces partial or slower memory sets

Install this kit when the board is running fewer than sixteen DIMMs, when installed modules are slower than 5600 MT/s, or when non-ECC UDIMMs are present and registered ECC is required. The upgrade is worth it only if the system manual confirms 1TB maximum capacity and the correct population sequence for sixteen 2Rx4 modules. Buyers who need a different capacity, a UDIMM form factor, or compatibility with another motherboard should not use this kit.

Najważniejsze cechy

  • 1TB kit (16 × 64 GB) for high-capacity server workloads
  • DDR5-5600 (PC5-44800) at CL46 for rated-speed operation
  • Registered ECC RDIMM with 2Rx4 rank for full-population stability
  • 10 V standard voltage for efficient power draw
  • 288-pin form factor matched to Supermicro H13DSG-OM motherboard

Specyfikacja

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Server Memory
ModelDDR5 ECC RDIMM Registered Server Memory
Part NumberMR44800-924K16
Capacity1TB (16 x 64GB)
Type288-Pin DDR5 RDIMM
SpeedDDR5 5600 (PC5 44800)
CAS LatencyCL46
Voltage1.10V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx4
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemSupermicro
FeaturesDDR5 ECC RDIMM Motherboard Compatible
Package Content1TB 16X64GB DDR5 5600MHz PC5-44800 2Rx4 1.1V 288-PIN ECC RDIMM KIT

Inne wersje tego modelu

Jeszcze 5 w tej samej serii

Ta sama rodzina, inna pamięć, inne chłodzenie lub taktowanie — proszę porównać przed decyzją.

Pytania dotyczące tego produktu

How do I install the 16 DDR5 RDIMM modules in the Supermicro H13DSG-OM and which population step is often missed?

Follow the motherboard manual for the exact 16-slot population order; the step most often missed is installing modules in the prescribed sequence per CPU socket rather than filling slots sequentially.

What maintenance or replacement will this 1TB DDR5 ECC RDIMM kit need over its service life?

The modules have no moving parts and require no scheduled maintenance; replacement is only necessary if a DIMM fails, which is covered by the lifetime replacement warranty.

What is the first limit that appears when the 16x64GB kit runs sustained workloads at DDR5 5600?

The registered ECC architecture is designed to keep every slot stable at full 5600 MT/s and 1.1V, so the practical limit encountered first is the motherboard's maximum supported capacity and population rules.

Także w tym dziale

Klienci porównywali też te produkty

Ten sam dział, ta sama kasa — osiem kryptowalut i 30-minutowa blokada kursu.