Akceptujemy kryptowaluty — posiadane środki można więc wykorzystać na zakup prawdziwego sprzętu.Płatność kryptowalutą — realny sprzęt w zamian. Bezpłatna, ubezpieczona dostawa na całym świecie powyżej 399 $. Neutralne kartony, bez oznaczeń, wysyłane z Niemiec.Bezpłatna, ubezpieczona dostawa powyżej 399 $. Kurs zostaje zablokowany na 30 minut od otwarcia kasy.Kurs zablokowany na 30 minut. Każdy produkt jest fabrycznie zapieczętowany, jego numer seryjny jest sprawdzany, a całość objęta jest 24-miesięczną gwarancją.Zapieczętowane fabrycznie, 24 miesiące gwarancji.

Obserwowane produkty Zaloguj się
Twelve green DDR5 RDIMM modules in anti-static tray

NEMIX RAM

NEMIX RAM 1.5TB 12x128GB DDR5 5600MHz PC5-44800 CL46 2Rx4 1.1V ECC Registered RDIMM Kit memory upgrade

SKU CH-KZ1X-2GV66

A 1.5 TB DDR5 ECC registered RDIMM kit of twelve 128 GB modules running at 5600 MHz with CL46 latency and 1.1 V, validated for the Supermicro H13DSG-OM motherboard

  • Capacity1.5TB (12 x 128GB)
  • Type288-Pin DDR5 RDIMM
  • SpeedDDR5 5600 (PC5 44800)
  • CAS LatencyCL46
  • Voltage1.10V
  • ECCYes

Size 1.5TB 12X128GB

Pokaż jeszcze 30 konfiguracji
  • 5 TB total capacity from 12 matched 128 GB modules
  • DDR5 5600 MT/s speed with CL46 latency for rated throughput
  • Registered ECC design corrects single-bit errors and supports full population
  • 1 V operation matches server memory-controller requirements
  • Verified fit for Supermicro H13DSG-OM motherboard 288-pin RDIMM slots

Supermicro H13DSG-OM memory kit

This 1.5 TB kit delivers twelve 128 GB DDR5 registered DIMMs built for the Supermicro H13DSG-OM motherboard. It targets administrators who need maximum supported capacity in every slot of that specific platform. The modules are ECC registered RDIMMs running at 5600 MHz with CL46 latency. They ship new and ready for installation in compatible servers.

DDR5 5600 registered ECC constraints

The 288-pin RDIMM form factor and registered architecture are mandatory for this motherboard; UDIMM or SODIMM modules will not fit or function. Registered buffering allows full population across all channels while ECC corrects single-bit errors in flight. Operation is fixed at 1.1 V and the rated 5600 MT/s speed with CL46 timing. Deviating from these specifications will prevent the system from posting at full capacity.

1.5 TB capacity ceiling

Twelve ranks of 2Rx4 DRAM provide the full 1.5 TB ceiling this board accepts when populated per its memory-population rules. Workloads such as large in-memory databases, virtualization hosts and scientific compute benefit from the headroom. Applications that require more than 1.5 TB or non-registered memory cannot be accommodated by this kit.

Najważniejsze cechy

  • 5 TB total capacity from 12 matched 128 GB modules
  • DDR5 5600 MT/s speed with CL46 latency for rated throughput
  • Registered ECC design corrects single-bit errors and supports full population
  • 1 V operation matches server memory-controller requirements
  • Verified fit for Supermicro H13DSG-OM motherboard 288-pin RDIMM slots

Specyfikacja

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Server Memory
ModelDDR5 ECC RDIMM Registered Server Memory
Part NumberMR44800-724K12
Capacity1.5TB (12 x 128GB)
Type288-Pin DDR5 RDIMM
SpeedDDR5 5600 (PC5 44800)
CAS LatencyCL46
Voltage1.10V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx4
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemSupermicro
FeaturesDDR5 ECC RDIMM Motherboard Compatible
Package Content1.5TB 12X128GB DDR5 5600MHz PC5-44800 2Rx4 1.1V 288-PIN ECC RDIMM KIT

Inne wersje tego modelu

Jeszcze 5 w tej samej serii

Ta sama rodzina, inna pamięć, inne chłodzenie lub taktowanie — proszę porównać przed decyzją.

Pytania dotyczące tego produktu

Should I pick this 1.5 TB kit or a smaller capacity for my Supermicro H13DSG-OM?

This kit fills twelve slots with 128 GB modules for 1.5 TB total; choose it only if your motherboard manual confirms full 12-DIMM population at DDR5-5600.

Will the DDR5-5600 rating actually run at 5600 MT/s once installed?

Yes — the modules are spec-matched to the board's memory controller, so all twelve registered DIMMs operate at the rated 5600 MT/s with CL46 at 1.1 V.

Does the 288-pin RDIMM interface limit me to registered ECC only?

The 288-pin registered form factor requires RDIMM modules; unbuffered UDIMMs will not fit or function in this server platform.

Także w tym dziale

Klienci porównywali też te produkty

Ten sam dział, ta sama kasa — osiem kryptowalut i 30-minutowa blokada kursu.