Akceptujemy kryptowaluty — posiadane środki można więc wykorzystać na zakup prawdziwego sprzętu.Płatność kryptowalutą — realny sprzęt w zamian. Bezpłatna, ubezpieczona dostawa na całym świecie powyżej 399 $. Neutralne kartony, bez oznaczeń, wysyłane z Niemiec.Bezpłatna, ubezpieczona dostawa powyżej 399 $. Kurs zostaje zablokowany na 30 minut od otwarcia kasy.Kurs zablokowany na 30 minut. Każdy produkt jest fabrycznie zapieczętowany, jego numer seryjny jest sprawdzany, a całość objęta jest 24-miesięczną gwarancją.Zapieczętowane fabrycznie, 24 miesiące gwarancji.

Obserwowane produkty Zaloguj się
Sixteen green DDR5 RDIMM modules in a row, no heat spreaders, gold contacts visible

NEMIX RAM

NEMIX RAM MR38400-724K16 2TB 16x128GB DDR5 4800 CL40 1.1V 2Rx4 ECC RDIMM Supermicro H14DSG-OM

SKU CH-DJYD-DFSXT

A 2 TB kit of sixteen 128 GB DDR5 RDIMM modules running at 4800 MT/s with CL40 latency, 1.1 V operation, 2Rx4 registered ECC for the Supermicro H14DSG-OM motherboard

  • Capacity2TB (16 x 128GB)
  • Type288-Pin DDR5 RDIMM
  • SpeedDDR5 4800 (PC5 38400)
  • CAS LatencyCL40
  • Voltage1.10V
  • ECCYes

Size 2TB 16X128GB

Pokaż jeszcze 30 konfiguracji
  • 2 TB total capacity lets you fully populate 16 slots with 128 GB modules
  • DDR5-4800 speed and CL40 latency match the board's rated timing for stable throughput
  • Registered ECC architecture offloads the controller and corrects single-bit errors on the fly
  • 1 V operation and 2Rx4 rank layout meet the exact electrical spec the server expects
  • 288-pin RDIMM form factor fits the Supermicro H14DSG-OM memory sockets without adapters

Exact-match DDR5 kit for Supermicro H14DSG-OM

This 2 TB kit contains sixteen 128 GB DDR5-4800 Registered ECC RDIMMs built to the precise rank, voltage and timing the motherboard expects. It is intended for administrators upgrading that specific Supermicro platform to its full memory capacity.

DDR5 RDIMM population rules apply

Registered DIMMs let the memory controller drive every slot at rated speed, but the board’s manual dictates which sockets must be filled first and the maximum capacity per channel. ECC corrects single-bit errors automatically, yet total capacity and population order remain constrained by the platform firmware.

Sixteen 128 GB modules fill every slot

The kit delivers 2 TB only when all sixteen DIMM sockets are occupied with these 2Rx4 modules. Systems with fewer slots or a lower per-channel limit cannot use the full kit, so verify the motherboard’s supported configuration before purchase.

Najważniejsze cechy

  • 2 TB total capacity lets you fully populate 16 slots with 128 GB modules
  • DDR5-4800 speed and CL40 latency match the board's rated timing for stable throughput
  • Registered ECC architecture offloads the controller and corrects single-bit errors on the fly
  • 1 V operation and 2Rx4 rank layout meet the exact electrical spec the server expects
  • 288-pin RDIMM form factor fits the Supermicro H14DSG-OM memory sockets without adapters

Specyfikacja

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Server Memory
ModelDDR5 ECC RDIMM Registered Server Memory
Part NumberMR38400-724K16
Capacity2TB (16 x 128GB)
Type288-Pin DDR5 RDIMM
SpeedDDR5 4800 (PC5 38400)
CAS LatencyCL40
Voltage1.10V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx4
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemSupermicro
FeaturesDDR5 ECC RDIMM Motherboard Compatible
Package Content2TB 16X128GB DDR5 4800MHz PC5-38400 2Rx4 1.1V 288-PIN ECC RDIMM KIT

Inne wersje tego modelu

Jeszcze 5 w tej samej serii

Ta sama rodzina, inna pamięć, inne chłodzenie lub taktowanie — proszę porównać przed decyzją.

Pytania dotyczące tego produktu

Should I choose the 16-module 2 TB kit or a smaller kit for my Supermicro H14DSG-OM?

The 16 x 128 GB kit fills every slot on the H14DSG-OM and delivers the full 2 TB capacity the board supports; select a smaller kit only if you need fewer populated slots.

What does the 4800 MT/s rating mean once the modules are installed in the server?

The DDR5-4800 (PC5-38400) speed runs at the rated 4800 MT/s with CL40 latency at 1.10 V, giving the memory controller the exact timing it expects for full-capacity operation.

How does the 288-pin RDIMM interface limit what I can install?

The board requires 288-pin Registered DDR5 RDIMMs; UDIMM or SODIMM modules will not fit and cannot be used in this system.

Także w tym dziale

Klienci porównywali też te produkty

Ten sam dział, ta sama kasa — osiem kryptowalut i 30-minutowa blokada kursu.