Akceptujemy kryptowaluty — posiadane środki można więc wykorzystać na zakup prawdziwego sprzętu.Płatność kryptowalutą — realny sprzęt w zamian. Bezpłatna, ubezpieczona dostawa na całym świecie powyżej 399 $. Neutralne kartony, bez oznaczeń, wysyłane z Niemiec.Bezpłatna, ubezpieczona dostawa powyżej 399 $. Kurs zostaje zablokowany na 30 minut od otwarcia kasy.Kurs zablokowany na 30 minut. Każdy produkt jest fabrycznie zapieczętowany, jego numer seryjny jest sprawdzany, a całość objęta jest 24-miesięczną gwarancją.Zapieczętowane fabrycznie, 24 miesiące gwarancji.

Obserwowane produkty Zaloguj się
Four green DDR5 RDIMM modules without heat spreaders in a clear tray

NEMIX RAM

NEMIX RAM 128GB 4x32GB DDR5 4800 CL40 1.1V ECC RDIMM Supermicro H13DSG-OM memory upgrade

SKU CH-DVJ8-PSWSE

A 128 GB DDR5-4800 registered ECC kit with four 32 GB modules, CL40 latency and 1.1 V operation, validated for the Supermicro H13DSG-OM motherboard

  • Capacity128GB (4 x 32GB)
  • Type288-Pin DDR5 RDIMM
  • SpeedDDR5 4800 (PC5 38400)
  • CAS LatencyCL40
  • Voltage1.10V
  • ECCYes

Size 128GB 4X32GB

Pokaż jeszcze 30 konfiguracji
  • 128 GB total capacity from four 32 GB modules
  • DDR5 4800 speed with CL40 latency at 1.1 V
  • ECC and registered design prevents data errors
  • 288-pin RDIMM form factor fits Supermicro H13DSG-OM
  • Lifetime replacement warranty with US-based technical support

Exact-match DDR5 RDIMM kit for Supermicro H13DSG-OM

This 128 GB kit contains four 32 GB DDR5-4800 registered ECC modules built to the precise rank, voltage and timing the server's memory controller expects. It is intended for administrators upgrading a Supermicro H13DSG-OM motherboard to full capacity with validated components.

DDR5-4800 registered ECC limits and population rules

The DDR5-4800 (PC5-38400) standard runs at 1.1 V with CL40 latency and 2Rx8 organisation; registered buffering allows every slot to be populated at full rated speed, while ECC corrects single-bit errors in flight. Your board's memory-population rules dictate which slots must be filled first and the maximum capacity per channel, so the kit will only operate at its rated specification when installed in the approved order.

Verify manual for supported capacity and slot order

Before ordering, consult the Supermicro H13DSG-OM manual for the exact supported capacities, approved DIMM population sequence and installation steps, because server memory support varies by model and BIOS revision. Buyers needing a different total capacity, a different rank configuration or non-registered modules should look elsewhere.

Najważniejsze cechy

  • 128 GB total capacity from four 32 GB modules
  • DDR5 4800 speed with CL40 latency at 1.1 V
  • ECC and registered design prevents data errors
  • 288-pin RDIMM form factor fits Supermicro H13DSG-OM
  • Lifetime replacement warranty with US-based technical support

Specyfikacja

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Server Memory
ModelDDR5 ECC RDIMM Registered Server Memory
Part NumberMR38400-328K4
Capacity128GB (4 x 32GB)
Type288-Pin DDR5 RDIMM
SpeedDDR5 4800 (PC5 38400)
CAS LatencyCL40
Voltage1.10V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx8
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemSupermicro
FeaturesDDR5 ECC RDIMM Motherboard Compatible
Package Content128GB 4X32GB DDR5 4800MHz PC5-38400 2Rx8 1.1V 288-PIN ECC RDIMM KIT

Inne wersje tego modelu

Jeszcze 5 w tej samej serii

Ta sama rodzina, inna pamięć, inne chłodzenie lub taktowanie — proszę porównać przed decyzją.

Pytania dotyczące tego produktu

Should I choose the 4x32GB kit or a different capacity for my Supermicro H13DSG-OM?

The 4x32GB kit provides 128GB total capacity using four 2Rx8 registered DIMMs. This matches the board's population rules for full-slot operation at rated speed.

What does the DDR5 4800 rating mean once the modules are installed in the server?

The memory controller will run the kit at 4800 MT/s with CL40 timings at 1.1V, delivering PC5-38400 bandwidth across all four channels when fully populated.

How does the 288-pin RDIMM interface affect what I can install?

The 288-pin registered RDIMM form factor is required by the H13DSG-OM; UDIMM or SODIMM modules will not fit or function in this server board.

Także w tym dziale

Klienci porównywali też te produkty

Ten sam dział, ta sama kasa — osiem kryptowalut i 30-minutowa blokada kursu.