Akceptujemy kryptowaluty — posiadane środki można więc wykorzystać na zakup prawdziwego sprzętu.Płatność kryptowalutą — realny sprzęt w zamian. Bezpłatna, ubezpieczona dostawa na całym świecie powyżej 399 $. Neutralne kartony, bez oznaczeń, wysyłane z Niemiec.Bezpłatna, ubezpieczona dostawa powyżej 399 $. Kurs zostaje zablokowany na 30 minut od otwarcia kasy.Kurs zablokowany na 30 minut. Każdy produkt jest fabrycznie zapieczętowany, jego numer seryjny jest sprawdzany, a całość objęta jest 24-miesięczną gwarancją.Zapieczętowane fabrycznie, 24 miesiące gwarancji.

Obserwowane produkty Zaloguj się
Two green DDR5 RDIMM sticks, black chips, no heat spreader

NEMIX RAM

NEMIX RAM 128GB (2x64GB) DDR5 4800 CL40 1.1V ECC Registered RDIMM Supermicro H13DSH memory upgrade

SKU CH-A9Z5-H7Y1H

128 GB DDR5 4800 CL40 ECC Registered RDIMM kit (2×64 GB) validated for Supermicro H13DSH servers

  • Capacity128GB (2 x 64GB)
  • Type288-Pin DDR5 RDIMM
  • SpeedDDR5 4800 (PC5 38400)
  • CAS LatencyCL40
  • Voltage1.10V
  • ECCYes

Size 128GB 2X64GB

Pokaż jeszcze 30 konfiguracji
  • 128 GB total capacity from two 64 GB modules for dense server memory
  • DDR5 4800 speed with CL40 latency delivers rated bandwidth to the platform
  • Registered ECC architecture corrects single-bit errors and offloads the memory controller
  • 1 V operation matches the board's voltage requirement for stable operation
  • 288-pin RDIMM form factor fits the Supermicro H13DSH motherboard exactly

Server memory kit for Supermicro H13DSH

This 128GB kit contains two 64GB DDR5 RDIMM modules built for the Supermicro H13DSH motherboard. It targets administrators who need registered ECC memory that the platform recognises at full capacity without manual tuning. The 2Rx4 organisation and 1.10V operation match the board's native memory-controller expectations.

DDR5-4800 speed and registered architecture

The modules run at 4800 MT/s (PC5-38400) with CL40 latency, the highest JEDEC-standard rate this platform supports natively. Registered buffering lets every slot stay populated at rated speed, while on-die ECC corrects single-bit errors before they reach the OS. Mixing ranks or voltages would break this stability.

2Rx4 registered ECC RDIMM form factor

The 288-pin RDIMM package with 2Rx4 rank layout is the single specification that determines compatibility. UDIMM, SODIMM or single-rank modules will not be accepted by the H13DSH memory controller. Verify the motherboard manual for approved population order before installation.

Najważniejsze cechy

  • 128 GB total capacity from two 64 GB modules for dense server memory
  • DDR5 4800 speed with CL40 latency delivers rated bandwidth to the platform
  • Registered ECC architecture corrects single-bit errors and offloads the memory controller
  • 1 V operation matches the board's voltage requirement for stable operation
  • 288-pin RDIMM form factor fits the Supermicro H13DSH motherboard exactly

Specyfikacja

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Server Memory
ModelDDR5 ECC RDIMM Registered Server Memory
Part NumberMR38400-924K2
Capacity128GB (2 x 64GB)
Type288-Pin DDR5 RDIMM
SpeedDDR5 4800 (PC5 38400)
CAS LatencyCL40
Voltage1.10V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx4
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemSupermicro
FeaturesDDR5 ECC RDIMM Motherboard Compatible
Package Content128GB 2X64GB DDR5 4800MHz PC5-38400 2Rx4 1.1V 288-PIN ECC RDIMM KIT

Inne wersje tego modelu

Jeszcze 5 w tej samej serii

Ta sama rodzina, inna pamięć, inne chłodzenie lub taktowanie — proszę porównać przed decyzją.

Pytania dotyczące tego produktu

Should I pick the 128 GB kit or a different capacity for my Supermicro H13DSH?

The kit supplies 128 GB as two 64 GB modules, matching the exact rank, voltage and timing the H13DSH memory controller expects for full-speed operation.

What does the DDR5-4800 rating mean once the modules are installed in the server?

The modules run at 4800 MT/s with CL40 latency at 1.10 V, delivering the PC5-38400 bandwidth the platform specifies when all slots are populated.

How does the 288-pin RDIMM interface limit what I can install?

The 288-pin Registered DIMM form factor is required by the H13DSH; UDIMM or SODIMM modules will not fit or function in this board.

Także w tym dziale

Klienci porównywali też te produkty

Ten sam dział, ta sama kasa — osiem kryptowalut i 30-minutowa blokada kursu.