Aceitamos criptomoeda — para que as moedas que detém possam comprar material informático real.Pague em cripto, gaste-a em material informático real. Envio seguro gratuito para todo o mundo acima de 399 $. Caixas neutras, sem marca, expedidas a partir da Alemanha.Envio seguro gratuito acima de 399 $. A sua taxa fica bloqueada durante 30 minutos assim que abre a finalização da compra.Taxa bloqueada 30 minutos. Cada artigo é selado, o seu número de série é verificado, e está coberto por uma garantia de 24 meses.Selado, garantido 24 meses.

Artigos guardados Iniciar sessão
Four green DDR5 RDIMM modules without heat spreaders in a clear tray

NEMIX RAM

NEMIX RAM 128GB 4x32GB DDR5 4800 CL40 1.1V ECC RDIMM Supermicro H13DSG-OM memory upgrade

SKU CH-DVJ8-PSWSE

A 128 GB DDR5-4800 registered ECC kit with four 32 GB modules, CL40 latency and 1.1 V operation, validated for the Supermicro H13DSG-OM motherboard

  • Capacity128GB (4 x 32GB)
  • Type288-Pin DDR5 RDIMM
  • SpeedDDR5 4800 (PC5 38400)
  • CAS LatencyCL40
  • Voltage1.10V
  • ECCYes

Size 128GB 4X32GB

Ver as outras 30 configurações
  • 128 GB total capacity from four 32 GB modules
  • DDR5 4800 speed with CL40 latency at 1.1 V
  • ECC and registered design prevents data errors
  • 288-pin RDIMM form factor fits Supermicro H13DSG-OM
  • Lifetime replacement warranty with US-based technical support

Exact-match DDR5 RDIMM kit for Supermicro H13DSG-OM

This 128 GB kit contains four 32 GB DDR5-4800 registered ECC modules built to the precise rank, voltage and timing the server's memory controller expects. It is intended for administrators upgrading a Supermicro H13DSG-OM motherboard to full capacity with validated components.

DDR5-4800 registered ECC limits and population rules

The DDR5-4800 (PC5-38400) standard runs at 1.1 V with CL40 latency and 2Rx8 organisation; registered buffering allows every slot to be populated at full rated speed, while ECC corrects single-bit errors in flight. Your board's memory-population rules dictate which slots must be filled first and the maximum capacity per channel, so the kit will only operate at its rated specification when installed in the approved order.

Verify manual for supported capacity and slot order

Before ordering, consult the Supermicro H13DSG-OM manual for the exact supported capacities, approved DIMM population sequence and installation steps, because server memory support varies by model and BIOS revision. Buyers needing a different total capacity, a different rank configuration or non-registered modules should look elsewhere.

Pontos fortes

  • 128 GB total capacity from four 32 GB modules
  • DDR5 4800 speed with CL40 latency at 1.1 V
  • ECC and registered design prevents data errors
  • 288-pin RDIMM form factor fits Supermicro H13DSG-OM
  • Lifetime replacement warranty with US-based technical support

Especificações

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Server Memory
ModelDDR5 ECC RDIMM Registered Server Memory
Part NumberMR38400-328K4
Capacity128GB (4 x 32GB)
Type288-Pin DDR5 RDIMM
SpeedDDR5 4800 (PC5 38400)
CAS LatencyCL40
Voltage1.10V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx8
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemSupermicro
FeaturesDDR5 ECC RDIMM Motherboard Compatible
Package Content128GB 4X32GB DDR5 4800MHz PC5-38400 2Rx8 1.1V 288-PIN ECC RDIMM KIT

Outras versões deste modelo

Mais 5 nesta gama

Mesma família, memória, ventoinha ou frequência diferentes — compare antes de decidir.

Perguntas sobre este artigo

Should I choose the 4x32GB kit or a different capacity for my Supermicro H13DSG-OM?

The 4x32GB kit provides 128GB total capacity using four 2Rx8 registered DIMMs. This matches the board's population rules for full-slot operation at rated speed.

What does the DDR5 4800 rating mean once the modules are installed in the server?

The memory controller will run the kit at 4800 MT/s with CL40 timings at 1.1V, delivering PC5-38400 bandwidth across all four channels when fully populated.

How does the 288-pin RDIMM interface affect what I can install?

The 288-pin registered RDIMM form factor is required by the H13DSG-OM; UDIMM or SODIMM modules will not fit or function in this server board.

Também nesta secção

Os clientes também compararam

Mesma prateleira, mesma finalização da compra — oito moedas e uma taxa bloqueada durante 30 minutos.