暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料（保険付き）。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料（保険付き）。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン
Green rectangular circuit board with gold contacts and black memory chips, no heat spreader

NEMIX RAM

NEMIX RAM 48GB DDR5 4800 CL40 1.1V 2Rx8 RDIMM ECC memory upgrade for Supermicro H13DSG-OM

SKU CH-7R74-7CNMN

48 GB DDR5 RDIMM running at 4800 MT/s with CL40 latency and ECC for Supermicro H13DSG-OM servers

  • Capacity48GB
  • Type288-Pin DDR5 RDIMM
  • SpeedDDR5 4800 (PC5 38400)
  • CAS LatencyCL40
  • Voltage1.10V
  • ECCYes

Size 48GB

他に 30点の構成を表示
  • Exact DDR5-4800 CL40 1.1 V spec runs at full rated speed
  • Registered 2Rx8 ECC design keeps every slot stable at full capacity
  • 288-pin RDIMM form factor matches Supermicro H13DSG-OM slot requirements
  • On-die ECC corrects single-bit errors preventing silent data corruption
  • Lifetime replacement warranty with US-based technical support included

48 GB DDR5 RDIMM for Supermicro H13DSG-OM

This 48 GB DDR5 4800 RDIMM delivers registered ECC memory for the Supermicro H13DSG-OM motherboard. It operates at 1.1 V with CL40 timing in a 2Rx8 configuration across 288 pins. The module matches the exact rank, voltage and timing the board expects for full-speed operation.

Suited for servers needing registered ECC.

Registered ECC architecture offloads the memory controller so every slot runs fully populated at rated capacity while correcting single-bit errors on the fly. Systems that require unbuffered UDIMM or SODIMM modules cannot use this RDIMM. Builders should verify population rules in the motherboard manual before ordering.

48 GB per module at DDR5 4800 with CL40

Each module provides 48 GB at PC5-38400 speed with CL40 latency at 1.1 V. The 2Rx8 registered design supports full-capacity population across all approved slots. Capacity scales with the number of populated slots within the platform limits.

特長

  • Exact DDR5-4800 CL40 1.1 V spec runs at full rated speed
  • Registered 2Rx8 ECC design keeps every slot stable at full capacity
  • 288-pin RDIMM form factor matches Supermicro H13DSG-OM slot requirements
  • On-die ECC corrects single-bit errors preventing silent data corruption
  • Lifetime replacement warranty with US-based technical support included

仕様

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Server Memory
ModelDDR5 ECC RDIMM Registered Server Memory
Part NumberMR38400-4828K1
Capacity48GB
Type288-Pin DDR5 RDIMM
SpeedDDR5 4800 (PC5 38400)
CAS LatencyCL40
Voltage1.10V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx8
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemSupermicro
FeaturesDDR5 ECC RDIMM Motherboard Compatible
Package Content48GB DDR5 4800MHz PC5-38400 2Rx8 1.1V 288-PIN ECC RDIMM KIT

このモデルの他のバージョン

同シリーズにさらに 5点

同じファミリーで、メモリ・クーラー・クロックが異なります — 購入前に比較してください。

この商品に関する質問

What motherboard must I already have for this 48GB DDR5 4800 CL40 2Rx8 RDIMM to work?

This module is an exact-match upgrade for the Supermicro H13DSG-OM motherboard and requires that board's 288-pin RDIMM slots.

Can I keep my existing DDR5 RDIMMs and add this 48GB CL40 kit alongside them?

You can mix this kit with other DDR5 RDIMMs only if they share the same 4800 speed, 1.1V voltage, CL40 latency, and 2Rx8 rank, and if the board's population rules allow the combined capacity.

How do I confirm the 48GB DDR5 4800 module is running at its rated speed and ECC is active after installation?

Enter the BIOS or use a hardware-info tool to verify the memory reports 4800 MT/s, CL40 timings, 1.1V, and that ECC is shown as enabled for the full 48GB capacity.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。