NEMIX RAM 32GB DDR5 5600 2Rx8 CL46 1.1V RDIMM ECC Supermicro H14DSG-OD memory upgrade
- 32GB
- 288-Pin DDR5 RDIMM
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
NEMIX RAM
48 GB DDR5 RDIMM running at 4800 MT/s with CL40 latency and ECC for Supermicro H13DSG-OM servers
Size 48GB
This 48 GB DDR5 4800 RDIMM delivers registered ECC memory for the Supermicro H13DSG-OM motherboard. It operates at 1.1 V with CL40 timing in a 2Rx8 configuration across 288 pins. The module matches the exact rank, voltage and timing the board expects for full-speed operation.
Registered ECC architecture offloads the memory controller so every slot runs fully populated at rated capacity while correcting single-bit errors on the fly. Systems that require unbuffered UDIMM or SODIMM modules cannot use this RDIMM. Builders should verify population rules in the motherboard manual before ordering.
Each module provides 48 GB at PC5-38400 speed with CL40 latency at 1.1 V. The 2Rx8 registered design supports full-capacity population across all approved slots. Capacity scales with the number of populated slots within the platform limits.
| Brand | NEMIX RAM |
|---|---|
| Series | NEMIX RAM Original Series Server Memory |
| Model | DDR5 ECC RDIMM Registered Server Memory |
| Part Number | MR38400-4828K1 |
| Capacity | 48GB |
| Type | 288-Pin DDR5 RDIMM |
| Speed | DDR5 4800 (PC5 38400) |
| CAS Latency | CL40 |
| Voltage | 1.10V |
| ECC | Yes |
| Buffered/Registered | Registered |
| Rank | 2Rx8 |
| Chipset | Major OEM Samsung, Micron, Hynix |
| Heat Spreader | No |
| Compatible System | Supermicro |
| Features | DDR5 ECC RDIMM Motherboard Compatible |
| Package Content | 48GB DDR5 4800MHz PC5-38400 2Rx8 1.1V 288-PIN ECC RDIMM KIT |
Other versions of this model
Same family, different memory, cooler or clock — compare before you commit.
This module is an exact-match upgrade for the Supermicro H13DSG-OM motherboard and requires that board's 288-pin RDIMM slots.
You can mix this kit with other DDR5 RDIMMs only if they share the same 4800 speed, 1.1V voltage, CL40 latency, and 2Rx8 rank, and if the board's population rules allow the combined capacity.
Enter the BIOS or use a hardware-info tool to verify the memory reports 4800 MT/s, CL40 timings, 1.1V, and that ECC is shown as enabled for the full 48GB capacity.
Also in this aisle
Same shelf, same checkout — eight coins and a 30-minute rate lock.
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
Pick the language the site speaks to you in.
No language matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?