We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Sixteen green DDR5 RDIMM modules in anti-static tray

NEMIX RAM

NEMIX RAM 1TB 16x64GB DDR5 4800 CL40 1.1V 2Rx4 ECC RDIMM Supermicro H13DSG-OM memory upgrade

SKU CH-BD2V-KR204

A 1 TB registered ECC DDR5 kit of sixteen 64 GB modules running at 4800 MT/s with CL40 timing and 1.1 V, validated for the Supermicro H13DSG-OM motherboard

  • Capacity1TB (16 x 64GB)
  • Type288-Pin DDR5 RDIMM
  • SpeedDDR5 4800 (PC5 38400)
  • CAS LatencyCL40
  • Voltage1.10V
  • ECCYes

Size 1TB 16X64GB

Show 30 more configurations
  • 1TB capacity with 16 × 64 GB modules for maximum density
  • DDR5 4800 speed runs at rated frequency on Supermicro H13DSG-OM
  • Registered ECC 2Rx4 design prevents data corruption under full load
  • 1 V operation matches server memory-controller requirements exactly
  • 288-pin RDIMM form factor fits the board's DIMM slots precisely

Server memory kit for Supermicro H13DSG-OM

This 1 TB kit contains sixteen 64 GB DDR5 registered ECC RDIMMs built to the exact rank, voltage and timing the motherboard expects. It targets administrators who need every slot populated at full capacity without manual tuning.

Registered 288-pin RDIMM form factor

Registered buffering offloads the memory controller so all sixteen modules operate at the rated 4800 MT/s and 1.1 V. ECC corrects single-bit errors on the fly, preventing silent data corruption during sustained workloads.

Replaces partial or mixed-capacity DDR5 populations

The jump is worth it when the board's population rules call for a full complement of identical 2Rx4 modules to reach maximum supported memory. Buyers who need a different capacity per DIMM or a non-registered form factor should look elsewhere.

Highlights

  • 1TB capacity with 16 × 64 GB modules for maximum density
  • DDR5 4800 speed runs at rated frequency on Supermicro H13DSG-OM
  • Registered ECC 2Rx4 design prevents data corruption under full load
  • 1 V operation matches server memory-controller requirements exactly
  • 288-pin RDIMM form factor fits the board's DIMM slots precisely

Specifications

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Server Memory
ModelDDR5 ECC RDIMM Registered Server Memory
Part NumberMR38400-924K16
Capacity1TB (16 x 64GB)
Type288-Pin DDR5 RDIMM
SpeedDDR5 4800 (PC5 38400)
CAS LatencyCL40
Voltage1.10V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx4
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemSupermicro
FeaturesDDR5 ECC RDIMM Motherboard Compatible
Package Content1TB 16X64GB DDR5 4800MHz PC5-38400 2Rx4 1.1V 288-PIN ECC RDIMM KIT

Other versions of this model

5 more in the same range

Same family, different memory, cooler or clock — compare before you commit.

Questions about this item

Does the DDR5 4800 PC5-38400 interface limit the memory speed on this Supermicro H13DSG-OM kit?

The kit runs at DDR5 4800 (PC5 38400) with CL40 latency at 1.10 V, the exact speed and timing the H13DSG-OM memory controller expects for full-capacity operation.

What physical slot and form factor do the 16 modules need on the H13DSG-OM board?

Each 64 GB module is a 288-pin Registered RDIMM, the only form factor the H13DSG-OM accepts; UDIMM or SODIMM modules will not fit.

What is the correct population order when installing all 16 RDIMMs in the H13DSG-OM?

Follow the motherboard manual's DIMM population sequence for a full 16-module load; installing in the wrong slot order can prevent the system from recognising the full 1 TB capacity.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.