We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Two green DDR5 RDIMM modules without heat spreaders, 288-pin, 32GB kit

NEMIX RAM

NEMIX RAM DDR5 4800 32GB (2x16GB) CL40 1.1V ECC RDIMM Supermicro H13DSG-OM

SKU CH-2V8T-7P6MT

32 GB dual-rank DDR5 ECC registered kit runs at 4800 MT/s with CL40 latency and 1.1 V for the Supermicro H13DSG-OM

  • Capacity32GB (2 x 16GB)
  • Type288-Pin DDR5 RDIMM
  • SpeedDDR5 4800 (PC5 38400)
  • CAS LatencyCL40
  • Voltage1.10V
  • ECCYes

Size 32GB 2X16GB

Show 30 more configurations
  • Exact-match 32 GB kit with DDR5-4800 CL40 timing recognised at full speed
  • Registered ECC design corrects single-bit errors preventing silent data corruption
  • 1 V operation lowers power draw per module in dense servers
  • 288-pin RDIMM form factor fits Supermicro H13DSG-OM memory slots
  • Dual-rank 1Rx8 organisation enables full-capacity population across all channels

32GB DDR5 ECC RDIMM Kit

This 32GB kit contains two 16GB DDR5 4800 Registered ECC RDIMMs built for the Supermicro H13DSG-OM motherboard. It runs at 1.1V with CL40 latency and 1Rx8 organisation so the memory controller sees the exact rank and timing it expects.

Who this suits and who should look elsewhere

Server administrators upgrading or repairing a Supermicro H13DSG-OM system will get verified fitment and full-speed operation. Builders using consumer boards, laptops, or any platform that requires unbuffered UDIMMs or SODIMMs cannot use these registered modules.

Registered ECC with 1Rx8 rank

The Registered ECC architecture combined with 1Rx8 rank allows every slot to run fully populated at the rated 4800 speed while correcting single-bit errors on the fly, which is the specification that decides whether this kit matches your server's memory population rules.

Highlights

  • Exact-match 32 GB kit with DDR5-4800 CL40 timing recognised at full speed
  • Registered ECC design corrects single-bit errors preventing silent data corruption
  • 1 V operation lowers power draw per module in dense servers
  • 288-pin RDIMM form factor fits Supermicro H13DSG-OM memory slots
  • Dual-rank 1Rx8 organisation enables full-capacity population across all channels

Specifications

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Server Memory
ModelDDR5 ECC RDIMM Registered Server Memory
Part NumberMR38400-618K2
Capacity32GB (2 x 16GB)
Type288-Pin DDR5 RDIMM
SpeedDDR5 4800 (PC5 38400)
CAS LatencyCL40
Voltage1.10V
ECCYes
Buffered/RegisteredRegistered
Rank1Rx8
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemSupermicro
FeaturesDDR5 ECC RDIMM Motherboard Compatible
Package Content32GB 2X16GB DDR5 4800MHz PC5-38400 1Rx8 1.1V 288-PIN ECC RDIMM KIT

Other versions of this model

5 more in the same range

Same family, different memory, cooler or clock — compare before you commit.

Questions about this item

Does my Supermicro H13DSG-OM motherboard need to support 288-pin DDR5 RDIMM slots for this kit to work?

Yes, the kit uses 288-pin DDR5 RDIMM modules; your motherboard must provide matching registered DIMM slots for the memory to be recognized and operate at 4800 MT/s.

Can I add this 32 GB kit alongside existing DDR5 4800 RDIMM modules in the same server?

You can populate the remaining slots with this 2x16 GB CL40 1.1 V kit, but all installed RDIMMs must share the same speed, voltage, rank and timing for stable operation.

How do I confirm the system sees the full 32 GB at DDR5-4800 with ECC active after installation?

Check the BIOS memory summary or run a tool such as dmidecode; it should report 32 GB total, 4800 MT/s data rate, registered ECC type and CL40 timings.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.