We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in

NEMIX RAM

NEMIX RAM 96GB (2x48GB) DDR5 4800 CL40 1.1V ECC Registered RDIMM memory upgrade

SKU CH-D7KT-S7MRK

A 96 GB DDR5 ECC registered RDIMM kit (2 × 48 GB) at 4800 MHz CL40, 1.1 V, 2Rx8, verified for the Supermicro H13DSG-OM motherboard

  • Capacity96GB (2 x 48GB)
  • Type288-Pin DDR5 RDIMM
  • SpeedDDR5 4800 (PC5 38400)
  • CAS LatencyCL40
  • Voltage1.10V
  • ECCYes
  • 96 GB kit populates two slots for full server capacity
  • DDR5 4800 CL40 1.1 V matches controller timing exactly
  • Registered ECC 2Rx8 architecture corrects single-bit errors on the fly
  • 288-pin RDIMM form factor fits Supermicro H13DSG-OM motherboard
  • Lifetime replacement warranty with US-based technical support included

Server DDR5 ECC RDIMM Kit

This 96GB kit contains two 48GB Registered ECC DDR5 modules built for the Supermicro H13DSG-OM motherboard. It targets administrators who need exact-match memory that the board recognises at full capacity without manual tuning.

96GB Capacity with Registered Buffer

Two 48GB 2Rx8 DIMMs deliver 96GB total across a dual-channel layout. The registered architecture lets the memory controller drive every populated slot at the rated 4800 speed, while ECC corrects single-bit errors before they reach the operating system.

Low-Voltage Operation and Thermal Profile

Each module runs at 1.1V with no heat spreader, relying on server chassis airflow for cooling. Power draw stays within standard DDR5 RDIMM limits, and the lack of onboard thermal hardware keeps acoustic contribution negligible in a rack environment.

Highlights

  • 96 GB kit populates two slots for full server capacity
  • DDR5 4800 CL40 1.1 V matches controller timing exactly
  • Registered ECC 2Rx8 architecture corrects single-bit errors on the fly
  • 288-pin RDIMM form factor fits Supermicro H13DSG-OM motherboard
  • Lifetime replacement warranty with US-based technical support included

Specifications

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Server Memory
ModelDDR5 ECC RDIMM Registered Server Memory
Part NumberMR38400-4828K2
Capacity96GB (2 x 48GB)
Type288-Pin DDR5 RDIMM
SpeedDDR5 4800 (PC5 38400)
CAS LatencyCL40
Voltage1.10V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx8
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemSupermicro
FeaturesDDR5 ECC RDIMM Motherboard Compatible
Package Content96GB 2X48GB DDR5 4800MHz PC5-38400 2Rx8 1.1V 288-PIN ECC RDIMM KIT

Other versions of this model

5 more in the same range

Same family, different memory, cooler or clock — compare before you commit.

Questions about this item

Will the 2Rx8 registered ECC modules work if I keep my existing DDR5 4800 RDIMMs in the other slots on the Supermicro H13DSG-OM?

Yes, these 2Rx8 registered ECC RDIMMs follow the same DDR5 4800 PC5-38400 1.1V CL40 spec, so they can populate the remaining slots alongside identical modules.

How can I confirm the kit is running at DDR5 4800 with CL40 and ECC active after installation?

Enter the BIOS or use a tool like dmidecode; you should see each 48 GB module reported at 4800 MT/s, CAS latency 40, 1.1 V, with ECC and registered status enabled.

Does the package include anything besides the two 48 GB RDIMMs, or do I need to buy heatsinks or cables separately?

The box contains only the two 48 GB DDR5 4800 288-pin RDIMMs; no heat spreaders, cables or extra hardware are included or required.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.