We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Twelve green DDR5 RDIMM modules in a row, no heat spreaders

NEMIX RAM

NEMIX RAM DDR5 4800 1.5TB 12x128GB ECC RDIMM Supermicro H13SSH

SKU CH-RKY4-FK6ED

1.5 TB DDR5-4800 ECC RDIMM kit of twelve 128 GB modules at 1.1 V CL40 for Supermicro H13SSH servers

  • Capacity1.5TB (12 x 128GB)
  • Type288-Pin DDR5 RDIMM
  • SpeedDDR5 4800 (PC5 38400)
  • CAS LatencyCL40
  • Voltage1.10V
  • ECCYes

Size 1.5TB 12X128GB

Show 30 more configurations

Struck-through versions exist but are not stocked here.

  • 5 TB total capacity from 12 modules of 128 GB each
  • DDR5 4800 speed with CL40 latency for rated server performance
  • Registered ECC design corrects single-bit errors and stabilises full population
  • 1 V operation matches the Supermicro H13SSH memory controller spec
  • 288-pin RDIMM form factor fits the board's required slot type

Exact-match server kit

This 1.5 TB kit contains twelve 128 GB DDR5 RDIMMs rated at 4800 MT/s with CL40 latency and 1.1 V operation. It is built for administrators upgrading a Supermicro H13SSH motherboard that requires registered ECC modules in a fully populated configuration.

Registered ECC changes stability

Registered buffering reduces electrical load on the memory controller so all twelve slots can run at the rated 4800 MT/s without downclocking. On-die ECC detects and corrects single-bit errors in flight, preventing silent data corruption that would otherwise crash production workloads or corrupt databases.

DDR5 4800 practical limits

The JEDEC DDR5-4800 standard caps transfer rate at 4800 MT/s and fixes the command/address bus at 1.1 V, so this kit cannot exceed that speed on the H13SSH platform. Population rules in the motherboard manual dictate which slots must be filled first; incorrect ordering will halt POST or reduce usable capacity.

Highlights

  • 5 TB total capacity from 12 modules of 128 GB each
  • DDR5 4800 speed with CL40 latency for rated server performance
  • Registered ECC design corrects single-bit errors and stabilises full population
  • 1 V operation matches the Supermicro H13SSH memory controller spec
  • 288-pin RDIMM form factor fits the board's required slot type

Specifications

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Server Memory
ModelDDR5 ECC RDIMM Registered Server Memory
Part NumberMR38400-724K12
Capacity1.5TB (12 x 128GB)
Type288-Pin DDR5 RDIMM
SpeedDDR5 4800 (PC5 38400)
CAS LatencyCL40
Voltage1.10V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx4
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemSupermicro
FeaturesDDR5 ECC RDIMM Motherboard Compatible
Package Content1.5TB 12X128GB DDR5 4800MHz PC5-38400 2Rx4 1.1V 288-PIN ECC RDIMM KIT

Other versions of this model

5 more in the same range

Same family, different memory, cooler or clock — compare before you commit.

Questions about this item

Will the 12 modules need any active cooling such as fans or liquid loops during continuous operation?

The modules have no heat spreaders and run at 1.1V, so typical server chassis airflow is sufficient; no extra active cooling is required.

What limits sustained full-capacity throughput on the Supermicro H13SSH when all 12 slots are populated?

The DDR5 4800 CL40 timing and the board's memory controller define the maximum sustained bandwidth; no higher speed is supported with this population.

How much power does the 1.5 TB kit draw and how hot does it get under 24/7 load?

At 1.1V the 12 registered DIMMs consume modest power and stay cool with standard server airflow; no special thermal management is needed.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.