We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Sixteen green DDR5 RDIMM modules in a tray, bare black chips, no heat spreaders, gold contacts visible

NEMIX RAM

NEMIX RAM DDR5 4800 1.5TB 16x96GB ECC RDIMM Supermicro H13DSG-O-CPU memory upgrade

SKU CH-43YP-8R55X

1.5 TB DDR5-4800 registered ECC kit with sixteen 96 GB modules at 1.1 V and CL40 for the Supermicro H13DSG-O-CPU motherboard

  • Capacity1.5TB (16 x 96GB)
  • Type288-Pin DDR5 RDIMM
  • SpeedDDR5 4800 (PC5 38400)
  • CAS LatencyCL40
  • Voltage1.10V
  • ECCYes

Size 1.5TB 16X96GB

Show 30 more configurations
  • 5 TB total capacity from sixteen 96 GB modules
  • DDR5 4800 speed with CL40 latency at 1.1 V
  • Registered ECC RDIMM prevents silent data errors
  • 2Rx4 dual-rank organisation fully populates every slot
  • Exact-match kit validated for Supermicro H13DSG-O-CPU

1.5 TB DDR5 ECC RDIMM kit

This 1.5 TB kit contains 16 DDR5 4800 RDIMM modules at 96 GB each. Registered ECC architecture with 2Rx4 organisation and CL40 timing is built for the Supermicro H13DSG-O-CPU motherboard. It targets servers that need maximum registered capacity with on-the-fly error correction.

Check motherboard population rules

The H13DSG-O-CPU requires 288-pin Registered DIMMs, not UDIMM or SODIMM. Consult the system manual for supported capacities per socket, approved DIMM population order, and installation steps before ordering. Full-slot population at 1.1 V depends on the board’s qualified vendor list.

Sustained load with registered buffering

Registered buffering offloads the memory controller so every slot runs fully populated at rated speed during continuous workloads. ECC corrects single-bit errors on the fly to prevent silent data corruption and unplanned reboots. The 1.1 V operation keeps power draw stable across extended duty cycles.

Highlights

  • 5 TB total capacity from sixteen 96 GB modules
  • DDR5 4800 speed with CL40 latency at 1.1 V
  • Registered ECC RDIMM prevents silent data errors
  • 2Rx4 dual-rank organisation fully populates every slot
  • Exact-match kit validated for Supermicro H13DSG-O-CPU

Specifications

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Server Memory
ModelDDR5 ECC RDIMM Registered Server Memory
Part NumberMR38400-9624K16
Capacity1.5TB (16 x 96GB)
Type288-Pin DDR5 RDIMM
SpeedDDR5 4800 (PC5 38400)
CAS LatencyCL40
Voltage1.10V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx4
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemSupermicro
FeaturesDDR5 ECC RDIMM Motherboard Compatible
Package Content1.5TB 16X96GB DDR5 4800MHz PC5-38400 2Rx4 1.1V 288-PIN ECC RDIMM KIT

Other versions of this model

5 more in the same range

Same family, different memory, cooler or clock — compare before you commit.

Questions about this item

Does the 1.5TB kit ship as sixteen 96GB modules or do I need to order extra DIMMs?

The kit contains sixteen 96GB DDR5 4800 RDIMM modules, giving 1.5TB total capacity in a single package.

How do I decide between the 96GB 2Rx4 modules and a smaller capacity for my Supermicro H13DSG-O-CPU?

Choose the 96GB 2Rx4 RDIMMs when you need the maximum 1.5TB across all sixteen slots; smaller capacities only make sense if your CPU or BIOS limits per-slot density.

Will the CL40 timing at 4800MHz run at rated speed when all sixteen slots are populated?

Yes, the 2Rx4 registered ECC design is spec-matched to the board's memory controller, so full population at DDR5 4800 CL40 1.1V is supported.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.