We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Sixteen green DDR5 RDIMM modules in anti-static tray

NEMIX RAM

NEMIX RAM DDR5 4800 ECC RDIMM 2TB 16x128GB CL40 1.1V 2Rx4 Supermicro H13DSG-OM memory upgrade

SKU CH-C745-PV9RW

A 2 TB DDR5 ECC registered memory kit of sixteen 128 GB modules running at 4800 MHz CL40 and 1.1 V, validated for the Supermicro H13DSG-OM motherboard

  • Capacity2TB (16 x 128GB)
  • Type288-Pin DDR5 RDIMM
  • SpeedDDR5 4800 (PC5 38400)
  • CAS LatencyCL40
  • Voltage1.10V
  • ECCYes

Size 2TB 16X128GB

Show 30 more configurations
  • 2 TB capacity from sixteen 128 GB modules
  • DDR5 4800 speed with CL40 latency at 1.1 V
  • Registered ECC architecture corrects errors on the fly
  • Exact-fit 288-pin RDIMM for Supermicro H13DSG-OM
  • Major OEM Samsung, Micron, Hynix chips ensure enterprise stability

Server memory kit for Supermicro H13DSG-OM

This 2 TB DDR5 kit contains sixteen 128 GB registered ECC modules rated at 4800 MT/s with CL40 latency and 1.1 V operation. It is built for the Supermicro H13DSG-OM motherboard and delivers the exact rank, voltage and timing the platform expects for full-capacity recognition.

Administrators needing maximum registered ECC

The kit suits IT teams populating every slot on a Supermicro H13DSG-OM with 2Rx4 RDIMMs for enterprise workloads that demand error correction and registered buffering. Builders using consumer boards, laptops or systems that require unbuffered UDIMMs or SODIMMs cannot use these modules.

288-pin DDR5 RDIMM form factor

Each module uses the 288-pin registered DIMM interface required by the H13DSG-OM memory controller. If your server calls for a different pin count, voltage or unbuffered memory this kit will not install or function correctly.

Highlights

  • 2 TB capacity from sixteen 128 GB modules
  • DDR5 4800 speed with CL40 latency at 1.1 V
  • Registered ECC architecture corrects errors on the fly
  • Exact-fit 288-pin RDIMM for Supermicro H13DSG-OM
  • Major OEM Samsung, Micron, Hynix chips ensure enterprise stability

Specifications

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Server Memory
ModelDDR5 ECC RDIMM Registered Server Memory
Part NumberMR38400-724K16
Capacity2TB (16 x 128GB)
Type288-Pin DDR5 RDIMM
SpeedDDR5 4800 (PC5 38400)
CAS LatencyCL40
Voltage1.10V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx4
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemSupermicro
FeaturesDDR5 ECC RDIMM Motherboard Compatible
Package Content2TB 16X128GB DDR5 4800MHz PC5-38400 2Rx4 1.1V 288-PIN ECC RDIMM KIT

Other versions of this model

5 more in the same range

Same family, different memory, cooler or clock — compare before you commit.

Questions about this item

My Supermicro H13DSG-OM board has 16 DDR5 slots — do I need to fill all of them for this 16×128 GB kit to work?

The kit contains sixteen 128 GB modules. The H13DSG-OM supports up to 16 DIMMs, so you can populate every slot for the full 2 TB capacity.

Will these DDR5-4800 CL40 2Rx4 registered ECC modules run at rated speed if I keep older DDR5 RDIMMs in the remaining slots?

Mixing ranks, speeds or latencies forces the controller to run all channels at the lowest common settings. Replace all DIMMs with this matched 16-module kit for stable DDR5-4800 operation.

After installing all sixteen modules, how can I confirm the server sees the full 2 TB at DDR5-4800 with ECC active?

Check the BIOS memory summary or run dmidecode / lshw on Linux; each of the 16 slots should show 128 GB, 4800 MT/s, CL40, 1.1 V, registered ECC.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.