We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in

NEMIX RAM

NEMIX RAM 64GB (2×32GB) DDR5-4800 CL40 2Rx8 ECC Registered RDIMM for Supermicro H13DSG-OM

SKU CH-TRF6-5X8NE

A 64 GB dual-channel DDR5-4800 registered ECC kit built to the exact rank, voltage and timing the Supermicro H13DSG-OM expects

  • Capacity64GB (2 x 32GB)
  • Type288-Pin DDR5 RDIMM
  • SpeedDDR5 4800 (PC5 38400)
  • CAS LatencyCL40
  • Voltage1.10V
  • ECCYes
  • Full 64 GB capacity from a matched 2 × 32 GB kit
  • DDR5-4800 speed with CL40 latency at 1.10 V
  • Registered ECC design with 2Rx8 rank for stable full-load operation
  • 288-pin RDIMM form factor verified for Supermicro H13DSG-OM
  • Lifetime replacement warranty plus free US-based technical support

Exact-match DDR5 kit for Supermicro H13DSG-OM

This 64 GB kit delivers two 32 GB DDR5-4800 registered ECC RDIMMs built to the precise rank, voltage and timing the Supermicro H13DSG-OM memory controller expects. The modules arrive as a matched pair so the board recognises full capacity at rated speed without manual tuning.

DDR5-4800 registered ECC limits

The PC5-38400 standard sets a 4800 MT/s ceiling and CL40 latency that cannot be exceeded by this specification. Registered buffering lets every slot run fully populated at full capacity, while on-die ECC corrects single-bit errors before they reach production workloads.

Bare 288-pin RDIMM build implications

Without heat spreaders the modules sit at standard 288-pin height, fitting dense server chassis where taller DIMMs would block airflow or adjacent components. The registered interface reduces electrical load on the motherboard, enabling stable operation across all populated slots in the H13DSG-OM.

Highlights

  • Full 64 GB capacity from a matched 2 × 32 GB kit
  • DDR5-4800 speed with CL40 latency at 1.10 V
  • Registered ECC design with 2Rx8 rank for stable full-load operation
  • 288-pin RDIMM form factor verified for Supermicro H13DSG-OM
  • Lifetime replacement warranty plus free US-based technical support

Specifications

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Server Memory
ModelDDR5 ECC RDIMM Registered Server Memory
Part NumberMR38400-328K2
Capacity64GB (2 x 32GB)
Type288-Pin DDR5 RDIMM
SpeedDDR5 4800 (PC5 38400)
CAS LatencyCL40
Voltage1.10V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx8
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemSupermicro
FeaturesDDR5 ECC RDIMM Motherboard Compatible
Package Content64GB 2X32GB DDR5 4800MHz PC5-38400 2Rx8 1.1V 288-PIN ECC RDIMM KIT

Other versions of this model

5 more in the same range

Same family, different memory, cooler or clock — compare before you commit.

Questions about this item

Should I choose the 64GB kit or buy single 32GB modules for my Supermicro H13DSG-OM?

The 64GB kit contains two matched 32GB modules tested together, ensuring the dual-rank 2Rx8 configuration works correctly across both slots on your Supermicro H13DSG-OM motherboard.

What does the DDR5-4800 CL40 rating mean for actual server performance?

The modules run at 4800 MT/s with a CAS latency of 40 cycles at 1.1V, delivering the standard JEDEC DDR5-4800 bandwidth your platform expects for registered ECC workloads.

How does the registered ECC RDIMM interface affect my memory configuration limits?

The 288-pin registered RDIMM design with ECC allows full-capacity population across all supported slots on the H13DSG-OM, buffering address and command signals to maintain stability with the 2Rx8 organization.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.