We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Six green DDR5 RDIMM modules with black chips, no heat spreaders, 288-pin

NEMIX RAM

NEMIX RAM 384GB (6×64GB) DDR5 4800 CL40 2Rx4 ECC Registered RDIMM Supermicro H13DSG-OM memory upgrade

SKU CH-3100-ZE3HW

A 384 GB six-module kit of DDR5 4800 CL40 2Rx4 registered ECC RDIMMs built for the Supermicro H13DSG-OM motherboard

  • Capacity384GB (6 x 64GB)
  • Type288-Pin DDR5 RDIMM
  • SpeedDDR5 4800 (PC5 38400)
  • CAS LatencyCL40
  • Voltage1.10V
  • ECCYes

Size 384GB 6X64GB

Show 30 more configurations
  • 384 GB total capacity from six 64 GB modules for maximum server density
  • DDR5 4800 speed with CL40 latency runs at rated performance
  • Registered ECC architecture corrects single-bit errors to prevent data corruption
  • 1 V operation matches the motherboard's memory-controller requirements
  • 288-pin RDIMM form factor fits the Supermicro H13DSG-OM exactly

Exact-match 384GB DDR5 kit

This NEMIX RAM kit provides 384GB across six 64GB DDR5-4800 Registered ECC RDIMMs. It is built for the Supermicro H13DSG-OM motherboard and targets administrators who need full-capacity, error-correcting memory for production servers.

Verify population rules first

Check your motherboard manual for supported capacities, approved DIMM population order and installation steps before ordering. The board requires 288-pin Registered RDIMMs; UDIMM or SODIMM modules will not fit or function.

Replaces smaller RDIMM sets

Upgrading from a lower-capacity kit or mixed-rank modules lets every slot run fully populated at the rated speed. The jump is worth it when workloads demand maximum registered ECC capacity and the platform supports the full 384GB configuration.

Highlights

  • 384 GB total capacity from six 64 GB modules for maximum server density
  • DDR5 4800 speed with CL40 latency runs at rated performance
  • Registered ECC architecture corrects single-bit errors to prevent data corruption
  • 1 V operation matches the motherboard's memory-controller requirements
  • 288-pin RDIMM form factor fits the Supermicro H13DSG-OM exactly

Specifications

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Server Memory
ModelDDR5 ECC RDIMM Registered Server Memory
Part NumberMR38400-924K6
Capacity384GB (6 x 64GB)
Type288-Pin DDR5 RDIMM
SpeedDDR5 4800 (PC5 38400)
CAS LatencyCL40
Voltage1.10V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx4
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemSupermicro
FeaturesDDR5 ECC RDIMM Motherboard Compatible
Package Content384GB 6X64GB DDR5 4800MHz PC5-38400 2Rx4 1.1V 288-PIN ECC RDIMM KIT

Other versions of this model

5 more in the same range

Same family, different memory, cooler or clock — compare before you commit.

Questions about this item

What comes in the 384GB kit and is anything else required for installation?

The kit contains six 64GB DDR5 4800 CL40 2Rx4 registered ECC RDIMMs. No additional parts are needed; install them directly into the Supermicro H13DSG-OM motherboard following the manual's population order.

Why choose the 384GB (6×64GB) configuration over smaller kits?

This kit fills six slots with 64GB 2Rx4 modules, delivering the full 384GB capacity at DDR5-4800 speeds while matching the board's registered ECC requirements and 1.1V voltage.

What does the DDR5-4800 CL40 rating mean for real-world server performance?

The modules run at 4800 MT/s with CL40 latency at 1.1V, providing the exact bandwidth and timing the H13DSG-OM memory controller expects for stable, error-corrected operation at full 384GB capacity.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.