NEMIX RAM 384GB 6x64GB DDR5 5600 PC5-44800 CL46 2Rx4 1.1V ECC RDIMM Supermicro H13DSG-OM memory upgrade
- 384GB (6 x 64GB)
- 288-Pin DDR5 RDIMM
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
NEMIX RAM
384GB DDR5-5600 ECC Registered RDIMM kit (4 × 96GB, CL46, 1.1V) validated for the Supermicro H14DST-FL motherboard
Size 384GB 4X96GB
This 384 GB kit contains four 96 GB DDR5-5600 Registered ECC RDIMMs built to the precise rank, voltage and timing the motherboard expects. Each module runs at 1.1 V with CL46 latency and a 2Rx4 organisation. The 288-pin form factor matches the board's memory slots exactly.
The kit upgrades systems running fewer modules or lower-speed DDR5 by filling all four slots with matched 96 GB RDIMMs at the rated 5600 MT/s data rate. Registered buffering and ECC keep every slot stable at full population while correcting single-bit errors on the fly. The jump is worth it when workloads need maximum registered capacity without down-clocking.
Consult the Supermicro H14DST-FL manual for approved DIMM installation order, supported capacities per channel and any BIOS version requirements. Confirm the board accepts 2Rx4 Registered ECC modules at 1.1 V and that your chassis clears standard-height RDIMMs. Buyers needing unbuffered UDIMMs or SODIMMs should look elsewhere.
| Brand | NEMIX RAM |
|---|---|
| Series | NEMIX RAM Original Series Server Memory |
| Model | DDR5 ECC RDIMM Registered Server Memory |
| Part Number | MR44800-9624K4 |
| Capacity | 384GB (4 x 96GB) |
| Type | 288-Pin DDR5 RDIMM |
| Speed | DDR5 5600 (PC5 44800) |
| CAS Latency | CL46 |
| Voltage | 1.10V |
| ECC | Yes |
| Buffered/Registered | Registered |
| Rank | 2Rx4 |
| Chipset | Major OEM Samsung, Micron, Hynix |
| Heat Spreader | No |
| Compatible System | Supermicro |
| Features | DDR5 ECC RDIMM Motherboard Compatible |
| Package Content | 384GB 4X96GB DDR5 5600MHz PC5-44800 2Rx4 1.1V 288-PIN ECC RDIMM KIT |
Other versions of this model
Same family, different memory, cooler or clock — compare before you commit.
Yes, the kit uses 288-pin DDR5 RDIMM form factor, which is the exact slot type required by the Supermicro H14DST-FL motherboard.
Install the four 2Rx4 modules following the population sequence shown in the Supermicro H14DST-FL manual; skipping the specified order can prevent the system from recognising the full 384GB capacity.
No heat spreaders are fitted on these RDIMMs, so they occupy only the standard module height and do not interfere with neighbouring slots or air coolers.
Also in this aisle
Same shelf, same checkout — eight coins and a 30-minute rate lock.
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
Pick the language the site speaks to you in.
No language matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?