We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Six green DDR5 RDIMM modules in anti-static tray

NEMIX RAM

NEMIX RAM DDR5 ECC RDIMM 288GB 6x48GB 5600MHz CL46 1.1V 2Rx8 Registered memory upgrade

SKU CH-9ZEC-CKNHS

A 288GB kit of six 48GB DDR5 ECC RDIMM modules running at 5600MHz CL46 1.1V 2Rx8, validated for the Supermicro H13DSG-OM motherboard

  • Capacity288GB (6 x 48GB)
  • Type288-Pin DDR5 RDIMM
  • SpeedDDR5 5600 (PC5 44800)
  • CAS LatencyCL46
  • Voltage1.10V
  • ECCYes

Size 288GB 6X48GB

Show 30 more configurations
  • 288 GB total capacity from six 48 GB modules for maximum server density
  • DDR5-5600 (PC5-44800) speed with CL46 latency runs at rated frequency
  • Registered ECC architecture offloads the controller and corrects single-bit errors on the fly
  • 1 V operation matches the board's memory controller specification exactly
  • Verified fitment for the Supermicro H13DSG-OM motherboard with 288-pin RDIMM form factor

Capacity and compatibility

This 288GB kit contains six 48GB DDR5 ECC Registered DIMMs rated at 5600MHz with CL46 latency and 1.1V operation. It is validated for the Supermicro H13DSG-OM motherboard and uses the 288-pin RDIMM form factor required by that platform.

Upgrade path and value

The kit replaces lower-capacity DDR5 RDIMM sets or mixed-rank configurations that limit total memory or force reduced speeds. The jump is worth it when your workloads need the full 288GB at the board's native 5600MHz without downclocking or population restrictions.

Pre-install checks

Verify your motherboard manual for approved DIMM population order and maximum supported capacity per slot. Confirm the system requires Registered ECC modules and that the BIOS is current enough to recognise 48GB 2Rx8 density at 5600MHz.

Highlights

  • 288 GB total capacity from six 48 GB modules for maximum server density
  • DDR5-5600 (PC5-44800) speed with CL46 latency runs at rated frequency
  • Registered ECC architecture offloads the controller and corrects single-bit errors on the fly
  • 1 V operation matches the board's memory controller specification exactly
  • Verified fitment for the Supermicro H13DSG-OM motherboard with 288-pin RDIMM form factor

Specifications

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Server Memory
ModelDDR5 ECC RDIMM Registered Server Memory
Part NumberMR44800-4828K6
Capacity288GB (6 x 48GB)
Type288-Pin DDR5 RDIMM
SpeedDDR5 5600 (PC5 44800)
CAS LatencyCL46
Voltage1.10V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx8
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemSupermicro
FeaturesDDR5 ECC RDIMM Motherboard Compatible
Package Content288GB 6X48GB DDR5 5600MHz PC5-44800 2Rx8 1.1V 288-PIN ECC RDIMM KIT

Other versions of this model

5 more in the same range

Same family, different memory, cooler or clock — compare before you commit.

Questions about this item

Will these 288-pin DDR5 RDIMMs fit the Supermicro H13DSG-OM motherboard?

Yes, the 288-pin DDR5 RDIMM form factor matches the slots on the Supermicro H13DSG-OM. The kit contains six 48 GB modules for a total of 288 GB.

What is the correct installation order for the six modules on this board?

Install the six RDIMMs following the population sequence shown in the Supermicro H13DSG-OM manual, filling the prescribed slots in the exact order to enable all memory channels.

Do the modules have a heat spreader, and will they need active cooling later?

The modules ship without a heat spreader. Standard server chassis airflow across the DIMM slots is sufficient; no extra cooling or maintenance is required.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.