We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Two green DDR5 RDIMM modules with black chips no heat spreader

NEMIX RAM

NEMIX RAM DDR5 5600 64GB (2x32GB) ECC Registered RDIMM CL46 1.1V 288-pin Supermicro H13DSG-OM

SKU CH-K6PW-8HT64

64 GB DDR5 5600 ECC registered RDIMM kit (2 × 32 GB) validated for the Supermicro H13DSG-OM motherboard

  • Capacity64GB (2 x 32GB)
  • Type288-Pin DDR5 RDIMM
  • SpeedDDR5 5600 (PC5 44800)
  • CAS LatencyCL46
  • Voltage1.10V
  • ECCYes

Size 64GB 2X32GB

Show 30 more configurations
  • Exact-match DDR5-5600 kit installs at rated speed and full capacity
  • 64 GB (2 × 32 GB) 2Rx8 registered ECC modules populate every slot
  • Registered architecture and ECC correct single-bit errors for production uptime
  • 10 V CL46 timing matches the Supermicro H13DSG-OM memory controller spec
  • 288-pin RDIMM form factor fits the board's required slot type

Server memory kit for Supermicro H13DSG-OM

This 64 GB kit contains two 32 GB DDR5 registered DIMMs built for the Supermicro H13DSG-OM motherboard. Each module is a 2Rx8 ECC RDIMM rated at 5600 MT/s with CL46 latency and 1.10 V operation. The registered design and error-correcting code suit multi-socket servers that need full-slot population and data integrity.

Registered ECC RDIMM form factor

The 288-pin registered DIMM format is the single specification that decides fitment; this board requires RDIMMs and will not accept unbuffered UDIMMs or SODIMMs. Matching the 2Rx8 rank structure, 1.10 V voltage and CL46 timing ensures the memory controller recognises the full 64 GB at the rated 5600 MT/s speed.

Slot population order matters

Installation is straightforward keyed insertion, but the motherboard manual defines the required DIMM population sequence for multi-channel operation. Skipping the approved order is the most common reason a server fails to post or reports reduced capacity. Verify the slot layout before seating both modules.

Highlights

  • Exact-match DDR5-5600 kit installs at rated speed and full capacity
  • 64 GB (2 × 32 GB) 2Rx8 registered ECC modules populate every slot
  • Registered architecture and ECC correct single-bit errors for production uptime
  • 10 V CL46 timing matches the Supermicro H13DSG-OM memory controller spec
  • 288-pin RDIMM form factor fits the board's required slot type

Specifications

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Server Memory
ModelDDR5 ECC RDIMM Registered Server Memory
Part NumberMR44800-328K2
Capacity64GB (2 x 32GB)
Type288-Pin DDR5 RDIMM
SpeedDDR5 5600 (PC5 44800)
CAS LatencyCL46
Voltage1.10V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx8
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemSupermicro
FeaturesDDR5 ECC RDIMM Motherboard Compatible
Package Content64GB 2X32GB DDR5 5600MHz PC5-44800 2Rx8 1.1V 288-PIN ECC RDIMM KIT

Other versions of this model

5 more in the same range

Same family, different memory, cooler or clock — compare before you commit.

Questions about this item

What does DDR5-5600 mean for my Supermicro H13DSG-OM server?

The modules run at 5600 MT/s with CL46 latency and 1.10 V, delivering PC5-44800 bandwidth when the board's memory controller is fully populated.

Will the 288-pin RDIMM interface work at full speed in every slot?

Registered ECC RDIMMs offload the controller so all populated slots operate at the rated 5600 MT/s without down-clocking.

What physical clearance do these 2Rx8 modules need?

Standard 288-pin RDIMM height fits the H13DSG-OM DIMM sockets; no heat spreader is present, so low-profile CPU coolers clear them.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.