We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in

NEMIX RAM

NEMIX RAM 192GB (2 x 96GB) DDR5 5600 CL46 1.1V ECC RDIMM for Supermicro H13DSG-OM memory upgrade

SKU CH-VKN0-N8KP7

192GB DDR5-5600 ECC registered RDIMM kit, two 96GB 2Rx4 modules at 1.1V CL46, validated for Supermicro H13DSG-OM servers

  • Capacity192GB (2 x 96GB)
  • Type288-Pin DDR5 RDIMM
  • SpeedDDR5 5600 (PC5 44800)
  • CAS LatencyCL46
  • Voltage1.10V
  • ECCYes
  • Exact-fit 192 GB kit for Supermicro H13DSG-OM motherboard
  • Registered ECC RDIMM architecture prevents silent data corruption
  • 2Rx4 DDR5-5600 CL46 at 1.1 V runs at rated speed
  • Major OEM Samsung Micron Hynix chips ensure enterprise reliability
  • Lifetime replacement warranty with free US-based technical support

192 GB DDR5 RDIMM kit for Supermicro H13DSG-OM

This 192 GB kit contains two 96 GB DDR5-5600 registered ECC modules built to the exact specifications of the Supermicro H13DSG-OM motherboard. Each DIMM runs at 1.1 V with CL46 timing and a 2Rx4 organisation so the memory controller recognises the full capacity at rated speed. It is intended for server administrators who need maximum registered memory in a validated configuration.

288-pin registered form factor fits the board's

The modules use the 288-pin RDIMM form factor this platform requires, not UDIMM or SODIMM, and match the board's population rules for dual-rank registered memory. Registered buffering reduces electrical load on the memory controller, allowing every slot to be populated at full capacity. ECC circuitry corrects single-bit errors on the fly to prevent silent data corruption. No heat spreader is fitted, so airflow in the chassis must be sufficient for bare DRAM.

Sustained operation at full rated speed and voltage

Under continuous load the kit operates at the specified DDR5-5600 (PC5-44800) data rate and 1.1 V without down-clocking, because the timings and rank structure are exactly what the controller expects. Registered buffering keeps signal integrity stable across all populated channels during prolonged workloads. ECC correction runs transparently in the background, maintaining data integrity without halting the system. Buyers who need unbuffered UDIMMs, lower capacities, or modules with integrated heat spreaders should look elsewhere.

Highlights

  • Exact-fit 192 GB kit for Supermicro H13DSG-OM motherboard
  • Registered ECC RDIMM architecture prevents silent data corruption
  • 2Rx4 DDR5-5600 CL46 at 1.1 V runs at rated speed
  • Major OEM Samsung Micron Hynix chips ensure enterprise reliability
  • Lifetime replacement warranty with free US-based technical support

Specifications

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Server Memory
ModelDDR5 ECC RDIMM Registered Server Memory
Part NumberMR44800-9624K2
Capacity192GB (2 x 96GB)
Type288-Pin DDR5 RDIMM
SpeedDDR5 5600 (PC5 44800)
CAS LatencyCL46
Voltage1.10V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx4
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemSupermicro
FeaturesDDR5 ECC RDIMM Motherboard Compatible
Package Content192GB 2X96GB DDR5 5600MHz PC5-44800 2Rx4 1.1V 288-PIN ECC RDIMM KIT

Other versions of this model

5 more in the same range

Same family, different memory, cooler or clock — compare before you commit.

Questions about this item

Will the 1.10V DDR5 5600 RDIMMs hit a thermal throttle limit during 24/7 server workloads?

The modules run at the standard 1.10V DDR5 voltage with no heat spreader; sustained load temperatures depend on your chassis airflow and the Supermicro H13DSG-OM DIMM slot cooling design.

How much acoustic noise or extra heat does the 192GB kit add when the system runs all day?

The RDIMMs are passive components with no fans; any noise or heat increase comes from the motherboard VRMs and system fans responding to the 192GB capacity at DDR5 5600 speed.

What motherboard and CPU combination must I already have for this 2Rx4 ECC RDIMM kit to function?

You need a Supermicro H13DSG-OM motherboard with a compatible processor that supports DDR5 5600 Registered ECC memory and the 2Rx4 rank configuration for full 192GB recognition.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.