We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Two green DDR5 RDIMM modules in static bags

NEMIX RAM

NEMIX RAM 32GB (2x16GB) DDR5 5600 CL46 1Rx8 ECC RDIMM Supermicro H13DSG-OM memory upgrade

SKU CH-QZQ0-M9TTB

32 GB dual-channel DDR5-5600 ECC registered kit with CL46 timing and 1.1 V operation for Supermicro H13DSG-OM servers

  • Capacity32GB (2 x 16GB)
  • Type288-Pin DDR5 RDIMM
  • SpeedDDR5 5600 (PC5 44800)
  • CAS LatencyCL46
  • Voltage1.10V
  • ECCYes

Size 32GB 2X16GB

Show 30 more configurations
  • Exact DDR5-5600 spec match for full-speed recognition
  • Registered ECC design prevents silent data corruption
  • 32 GB dual-rank kit fits Supermicro H13DSG-OM
  • 1 V CL46 timing meets server voltage budget
  • 288-pin RDIMM form factor matches board slots

Exact-match DDR5 upgrade for Supermicro H13DSG-OM

This 32 GB kit (2 × 16 GB) delivers DDR5 5600 (PC5-44800) CL46 at 1.1 V in a 288-pin registered ECC RDIMM. The 1Rx8 rank and voltage match the board's memory controller so the full capacity is recognised and runs at rated speed.

DDR5 RDIMM population rules limit mixing

Registered ECC architecture offloads the controller to keep every slot stable at full capacity, but DDR5 RDIMM population order and maximum capacity per channel are defined by the motherboard manual. Installing modules in unsupported slots or exceeding the board's rank limit will prevent boot or reduce speed.

Replaces non-ECC or slower DDR5 RDIMMs

Systems running standard unbuffered DDR5 or lower-frequency registered modules gain error correction and full-slot stability with this kit. The jump is worth it when the platform requires registered ECC to populate all channels at 5600 MT/s without down-clocking.

Highlights

  • Exact DDR5-5600 spec match for full-speed recognition
  • Registered ECC design prevents silent data corruption
  • 32 GB dual-rank kit fits Supermicro H13DSG-OM
  • 1 V CL46 timing meets server voltage budget
  • 288-pin RDIMM form factor matches board slots

Specifications

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Server Memory
ModelDDR5 ECC RDIMM Registered Server Memory
Part NumberMR44800-618K2
Capacity32GB (2 x 16GB)
Type288-Pin DDR5 RDIMM
SpeedDDR5 5600 (PC5 44800)
CAS LatencyCL46
Voltage1.10V
ECCYes
Buffered/RegisteredRegistered
Rank1Rx8
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemSupermicro
FeaturesDDR5 ECC RDIMM Motherboard Compatible
Package Content32GB 2X16GB DDR5 5600MHz PC5-44800 1Rx8 1.1V 288-PIN ECC RDIMM KIT

Other versions of this model

5 more in the same range

Same family, different memory, cooler or clock — compare before you commit.

Questions about this item

Should I choose the 32GB (2x16GB) kit or a different capacity for my Supermicro H13DSG-OM?

The 32GB kit provides two 16GB modules matching the board's 288-pin RDIMM slots. Check your motherboard manual for supported capacities and population rules before selecting a different size.

What does the DDR5 5600 CL46 rating mean for actual server performance?

The modules run at 5600 MT/s with CAS latency 46 at 1.1V. Registered ECC architecture lets every slot run fully populated at rated speed while correcting single-bit errors on the fly.

Is this DDR5 5600 RDIMM limited by the 288-pin registered interface in practice?

The 288-pin RDIMM form factor is exactly what the Supermicro H13DSG-OM requires. Registered buffering offloads the memory controller so all populated slots operate at the full 5600 MT/s rating.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.