We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in

NEMIX RAM

NEMIX RAM 192GB 6x32GB DDR5 5600 CL46 1.1V 2Rx8 ECC Registered RDIMM memory upgrade for Supermicro H13DSG-OM

SKU CH-DKQS-YKHAD

Six 32 GB DDR5 5600 CL46 registered ECC modules at 1.1 V for the Supermicro H13DSG-OM

  • Capacity192GB (6 x 32GB)
  • Type288-Pin DDR5 RDIMM
  • SpeedDDR5 5600 (PC5 44800)
  • CAS LatencyCL46
  • Voltage1.10V
  • ECCYes
  • 192 GB total capacity across six 32 GB modules
  • DDR5 5600 MT/s speed with CL46 latency
  • Registered ECC architecture for error correction and stability
  • 1 V low-voltage operation reduces power draw
  • Exact-match 288-pin RDIMM kit validated for Supermicro H13DSG-OM

Exact-match DDR5-5600 kit for Supermicro H13DSG-OM

This 192GB kit contains six 32GB DDR5 RDIMMs that run at 5600 MT/s with CL46 latency at 1.1V. Each module is a 2Rx8 registered ECC DIMM built with major OEM chips. The 288-pin form factor matches the memory slots on the Supermicro H13DSG-OM motherboard so the system recognises the full capacity at rated speed.

Sustained enterprise stability under full population

Registered buffering offloads the memory controller, allowing all six slots to operate at the rated 5600 MT/s without down-clocking. On-die ECC detects and corrects single-bit errors in real time, preventing silent data corruption during long compute runs. The 1.1V operating voltage keeps power draw consistent across fully populated channels.

Replaces partial or mixed-capacity configurations

This kit upgrades servers running smaller matched sets or mismatched DIMMs that force the controller to reduce speed or disable ranks. The jump is worthwhile when the workload needs the full 192GB at native DDR5-5600 throughput and registered ECC reliability. It does not suit builds that require UDIMM or SODIMM form factors or non-ECC memory.

Highlights

  • 192 GB total capacity across six 32 GB modules
  • DDR5 5600 MT/s speed with CL46 latency
  • Registered ECC architecture for error correction and stability
  • 1 V low-voltage operation reduces power draw
  • Exact-match 288-pin RDIMM kit validated for Supermicro H13DSG-OM

Specifications

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Server Memory
ModelDDR5 ECC RDIMM Registered Server Memory
Part NumberMR44800-328K6
Capacity192GB (6 x 32GB)
Type288-Pin DDR5 RDIMM
SpeedDDR5 5600 (PC5 44800)
CAS LatencyCL46
Voltage1.10V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx8
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemSupermicro
FeaturesDDR5 ECC RDIMM Motherboard Compatible
Package Content192GB 6X32GB DDR5 5600MHz PC5-44800 2Rx8 1.1V 288-PIN ECC RDIMM KIT

Other versions of this model

5 more in the same range

Same family, different memory, cooler or clock — compare before you commit.

Questions about this item

How much power does the 1.1V DDR5 5600 kit draw when all six slots run continuously?

Each 32 GB module operates at 1.1 V, so the full 192 GB kit runs at the standard DDR5 voltage without extra power overhead.

What motherboard slot type and population rules must the Supermicro H13DSG-OM already have for this 6 x 32 GB RDIMM kit to work?

The board needs six 288-pin DDR5 RDIMM slots populated in the order its manual specifies for 2Rx8 registered ECC modules.

Will these CL46 2Rx8 registered ECC modules run at 5600 MT/s alongside any older DDR5 RDIMMs I keep in the same server?

All slots must use identical DDR5 5600 registered ECC DIMMs; mixing ranks, speeds or latencies will prevent the memory controller from training at the rated frequency.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.