We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Two green DDR5 RDIMM modules with black chips, no heat spreaders

NEMIX RAM

NEMIX RAM DDR5 4800 192GB 2x96GB ECC RDIMM Supermicro H13SSH-E memory upgrade

SKU CH-DNTG-H4GS1

192 GB DDR5-4800 ECC registered DIMM kit (2 × 96 GB, CL40, 1.1 V, 288-pin) validated for Supermicro H13SSH-E motherboards

  • Capacity192GB (2 x 96GB)
  • Type288-Pin DDR5 RDIMM
  • SpeedDDR5 4800 (PC5 38400)
  • CAS LatencyCL40
  • Voltage1.10V
  • ECCYes

Size 192GB 2X96GB

Show 30 more configurations

Struck-through versions exist but are not stocked here.

  • 192 GB total capacity from two 96 GB modules
  • DDR5 4800 speed with CL40 latency for rated performance
  • Registered ECC design corrects single-bit errors on the fly
  • 10 V operation matches the motherboard memory controller spec
  • 288-pin RDIMM form factor fits the Supermicro H13SSH-E exactly

Capacity and fit

This 192GB kit contains two 96GB DDR5 4800 registered ECC RDIMMs built to the Supermicro H13SSH-E motherboard's exact specifications. The 288-pin modules match the board's required form factor, voltage and rank layout so the system recognises the full capacity at rated speed.

DDR5 interface limits

DDR5 4800 operates at 1.1V with a CL40 latency and a PC5-38400 data rate. The registered buffer reduces electrical load on the memory controller, allowing every slot to run fully populated, while ECC corrects single-bit errors before they affect production workloads.

Headroom and constraints

The 2Rx4 organisation and registered design let the platform scale to its maximum supported density without signal-integrity loss. Builders needing higher frequencies, lower latencies or unbuffered UDIMM modules must select a different memory type, as this kit is fixed at the board's native DDR5-4800 specification.

Highlights

  • 192 GB total capacity from two 96 GB modules
  • DDR5 4800 speed with CL40 latency for rated performance
  • Registered ECC design corrects single-bit errors on the fly
  • 10 V operation matches the motherboard memory controller spec
  • 288-pin RDIMM form factor fits the Supermicro H13SSH-E exactly

Specifications

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Server Memory
ModelDDR5 ECC RDIMM Registered Server Memory
Part NumberMR38400-9624K2
Capacity192GB (2 x 96GB)
Type288-Pin DDR5 RDIMM
SpeedDDR5 4800 (PC5 38400)
CAS LatencyCL40
Voltage1.10V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx4
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemSupermicro
FeaturesDDR5 ECC RDIMM Motherboard Compatible
Package Content192GB 2X96GB DDR5 4800MHz PC5-38400 2Rx4 1.1V 288-PIN ECC RDIMM KIT

Other versions of this model

5 more in the same range

Same family, different memory, cooler or clock — compare before you commit.

Questions about this item

Should I choose the 192GB kit or a different capacity for my Supermicro H13SSH-E?

This kit provides 192GB total using two 96GB modules, matching the exact rank, voltage, and timing the H13SSH-E memory controller expects for full-capacity recognition at rated speed.

What does the DDR5-4800 rating deliver once installed in the server?

The modules run at 4800 MT/s with CL40 latency at 1.1V, giving the bandwidth and error-correcting stability the platform specifies for fully populated registered DIMM slots.

How does the 288-pin RDIMM interface affect performance on this motherboard?

The registered 288-pin RDIMM form factor offloads the memory controller, allowing every slot to run fully populated at the rated 4800 MT/s while ECC corrects single-bit errors on the fly.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.