We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in

NEMIX RAM

NEMIX RAM DDR5 4800 32GB 2x16GB CL40 1.1V ECC RDIMM Supermicro H14DSG-OM memory upgrade

SKU CH-SRBD-9V1Y0

A 32 GB DDR5-4800 ECC registered dual-rank kit built to the exact voltage, timing and pin-out the Supermicro H14DSG-OM requires

  • Capacity32GB (2 x 16GB)
  • Type288-Pin DDR5 RDIMM
  • SpeedDDR5 4800 (PC5 38400)
  • CAS LatencyCL40
  • Voltage1.10V
  • ECCYes
  • Exact-match 32 GB kit runs at DDR5-4800 CL40 1.1 V
  • Registered ECC RDIMM design corrects single-bit errors on the fly
  • 1Rx8 288-pin layout matches Supermicro H14DSG-OM population rules
  • Dual 16 GB modules enable full-capacity dual-channel operation
  • Major-brand Samsung, Micron or Hynix DRAM chips ensure enterprise-grade stability

Supermicro H14DSG-OM memory upgrade

This 32 GB kit (2 x 16 GB) is a DDR5 4800 registered ECC RDIMM built to the exact rank, voltage and timing the Supermicro H14DSG-OM motherboard expects. It installs as a matched pair so the server recognises full capacity at rated speed.

DDR5 4800 registered DIMM limits

The modules run at 1.1 V with CL40 latency and a 1Rx8 organisation. Registered buffering offloads the memory controller, allowing every slot to run populated, while ECC corrects single-bit errors on the fly. The 288-pin DDR5 form factor is not compatible with UDIMM or SODIMM slots.

Check your server configuration

Consult the system or motherboard manual for supported capacities, approved DIMM population order and installation steps before ordering. This kit is designed only for the Supermicro H14DSG-OM platform and will not fit boards that require unbuffered or other DDR generations.

Highlights

  • Exact-match 32 GB kit runs at DDR5-4800 CL40 1.1 V
  • Registered ECC RDIMM design corrects single-bit errors on the fly
  • 1Rx8 288-pin layout matches Supermicro H14DSG-OM population rules
  • Dual 16 GB modules enable full-capacity dual-channel operation
  • Major-brand Samsung, Micron or Hynix DRAM chips ensure enterprise-grade stability

Specifications

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Server Memory
ModelDDR5 ECC RDIMM Registered Server Memory
Part NumberMR38400-618K2
Capacity32GB (2 x 16GB)
Type288-Pin DDR5 RDIMM
SpeedDDR5 4800 (PC5 38400)
CAS LatencyCL40
Voltage1.10V
ECCYes
Buffered/RegisteredRegistered
Rank1Rx8
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemSupermicro
FeaturesDDR5 ECC RDIMM Motherboard Compatible
Package Content32GB 2X16GB DDR5 4800MHz PC5-38400 1Rx8 1.1V 288-PIN ECC RDIMM KIT

Other versions of this model

5 more in the same range

Same family, different memory, cooler or clock — compare before you commit.

Questions about this item

Should I choose the 32 GB kit or buy single 16 GB modules?

The 32 GB kit contains two matched 16 GB modules tested together, so the memory controller sees identical timing and rank on both channels for stable dual-channel operation.

What does DDR5 4800 CL40 mean for my Supermicro H14DSG-OM server?

The modules run at 4800 MT/s with a CAS latency of 40 cycles at 1.1 V, delivering the exact speed and timing the board's memory controller expects for full-capacity registered ECC operation.

Does the 288-pin RDIMM interface limit how many modules I can install?

The registered 288-pin RDIMM design lets the board run every populated slot at the rated 4800 MT/s without signal degradation, so maximum capacity depends only on the motherboard's slot count and population rules.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.