We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Six green DDR5 RDIMM modules in a row, no heat spreaders, gold edge connectors visible

NEMIX RAM

NEMIX RAM DDR5 ECC RDIMM 576GB 6x96GB 4800 CL40 1.1V 2Rx4 Supermicro H13DSG-OM memory upgrade

SKU CH-2GV4-E1S9G

576GB DDR5 ECC RDIMM kit with six 96GB modules at 4800MHz CL40 1.1V 2Rx4 for Supermicro H13DSG-OM

  • Capacity576GB (6 x 96GB)
  • Type288-Pin DDR5 RDIMM
  • SpeedDDR5 4800 (PC5 38400)
  • CAS LatencyCL40
  • Voltage1.10V
  • ECCYes

Size 576GB 6X96GB

Show 30 more configurations
  • 576 GB total capacity from six 96 GB modules for dense memory configurations
  • DDR5 4800 speed with CL40 latency delivers rated throughput at 1.1 V
  • Registered ECC architecture offloads the controller and corrects single-bit errors
  • 288-pin RDIMM form factor matches the Supermicro H13DSG-OM slot requirements
  • Built with major OEM Samsung, Micron or Hynix components for enterprise stability

576GB DDR5 ECC RDIMM Kit

This 576GB kit contains six 96GB DDR5 4800 Registered ECC RDIMMs built for the Supermicro H13DSG-OM motherboard. Each module runs at 1.1V with CL40 latency and a 2Rx4 organisation. The registered design buffers address and control signals so the memory controller can drive a fully populated system. It is intended for administrators upgrading that specific server platform.

Suited for full-capacity server upgrades

The kit matches the board's required 288-pin RDIMM form factor, voltage, rank structure and timing so the firmware recognises every module at rated speed. ECC protection corrects single-bit errors on the fly, reducing silent data corruption in production workloads. Builders using consumer UDIMMs, SODIMMs or non-ECC memory should look elsewhere because those module types will not function in this registered-only platform.

2Rx4 registered ECC at 1.1V

The single specification that decides fitment is the 2Rx4 registered ECC organisation combined with 1.1V operation and CL40 timing at DDR5 4800. The Supermicro H13DSG-OM memory controller expects exactly this rank geometry and voltage; a different rank count, unbuffered design or voltage level will prevent the system from booting or running at full capacity.

Highlights

  • 576 GB total capacity from six 96 GB modules for dense memory configurations
  • DDR5 4800 speed with CL40 latency delivers rated throughput at 1.1 V
  • Registered ECC architecture offloads the controller and corrects single-bit errors
  • 288-pin RDIMM form factor matches the Supermicro H13DSG-OM slot requirements
  • Built with major OEM Samsung, Micron or Hynix components for enterprise stability

Specifications

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Server Memory
ModelDDR5 ECC RDIMM Registered Server Memory
Part NumberMR38400-9624K6
Capacity576GB (6 x 96GB)
Type288-Pin DDR5 RDIMM
SpeedDDR5 4800 (PC5 38400)
CAS LatencyCL40
Voltage1.10V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx4
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemSupermicro
FeaturesDDR5 ECC RDIMM Motherboard Compatible
Package Content576GB 6X96GB DDR5 4800MHz PC5-38400 2Rx4 1.1V 288-PIN ECC RDIMM KIT

Other versions of this model

5 more in the same range

Same family, different memory, cooler or clock — compare before you commit.

Questions about this item

Do I need a Supermicro H13DSG-OM motherboard with six available 288-pin DDR5 RDIMM slots to install this 576GB kit?

Yes, this kit is built for the Supermicro H13DSG-OM and requires six free 288-pin RDIMM sockets that support DDR5 4800 registered ECC memory at 1.1V.

Can I mix these 96GB 2Rx4 modules with smaller DDR5 RDIMMs already installed in the same server?

Mixing different capacities or ranks is not recommended; the H13DSG-OM's population rules expect identical 2Rx4 modules in each channel for stable operation at the rated 4800 speed.

How can I verify the full 576GB is recognised and running at CL40 after installation?

Check the BIOS memory information screen — it should show 576GB total, DDR5 4800 MT/s, CL40 timings and ECC active on all six slots.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.