저희는 암호화폐로 결제를 받습니다 — 보유하신 코인으로 실제 하드웨어를 구매하실 수 있습니다.암호화폐로 결제하고, 실제 하드웨어 구매에 사용하십시오. 전 세계 어디서나 US$399 이상 구매 시 무료 보험 배송. 무지 상자에 담아 독일에서 발송합니다.US$399 이상 구매 시 무료 보험 배송. 체크아웃을 시작하면 30분 동안 환율이 잠깁니다.30분간 환율 잠금. 모든 제품은 밀봉된 상태로 일련번호를 확인한 후 24개월 보증을 제공합니다.밀봉 포장, 24개월 보증.

가격 추적 로그인

NEMIX RAM

NEMIX RAM 384GB (4 x 96GB) DDR5-5600 ECC Registered RDIMM CL46 1.1V 288-pin Kit for Supermicro H14DST-FL

SKU CH-SZ2V-RAPMP

384GB DDR5-5600 ECC Registered RDIMM kit (4 × 96GB, CL46, 1.1V) validated for the Supermicro H14DST-FL motherboard

  • Capacity384GB (4 x 96GB)
  • Type288-Pin DDR5 RDIMM
  • SpeedDDR5 5600 (PC5 44800)
  • CAS LatencyCL46
  • Voltage1.10V
  • ECCYes
  • 384 GB total capacity from four 96 GB modules
  • DDR5-5600 speed with CL46 latency for rated throughput
  • Registered ECC design corrects single-bit errors on the fly
  • 1 V operation matches server memory-controller requirements
  • 288-pin RDIMM form factor verified for Supermicro H14DST-FL

Exact-match DDR5-5600 kit for Supermicro H14DST-FL

This 384 GB kit contains four 96 GB DDR5-5600 Registered ECC RDIMMs built to the precise rank, voltage and timing the motherboard expects. Each module runs at 1.1 V with CL46 latency and a 2Rx4 organisation. The 288-pin form factor matches the board's memory slots exactly.

Replaces partial or slower memory configurations

The kit upgrades systems running fewer modules or lower-speed DDR5 by filling all four slots with matched 96 GB RDIMMs at the rated 5600 MT/s data rate. Registered buffering and ECC keep every slot stable at full population while correcting single-bit errors on the fly. The jump is worth it when workloads need maximum registered capacity without down-clocking.

Verify motherboard population rules before ordering

Consult the Supermicro H14DST-FL manual for approved DIMM installation order, supported capacities per channel and any BIOS version requirements. Confirm the board accepts 2Rx4 Registered ECC modules at 1.1 V and that your chassis clears standard-height RDIMMs. Buyers needing unbuffered UDIMMs or SODIMMs should look elsewhere.

주요 특징

  • 384 GB total capacity from four 96 GB modules
  • DDR5-5600 speed with CL46 latency for rated throughput
  • Registered ECC design corrects single-bit errors on the fly
  • 1 V operation matches server memory-controller requirements
  • 288-pin RDIMM form factor verified for Supermicro H14DST-FL

사양

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Server Memory
ModelDDR5 ECC RDIMM Registered Server Memory
Part NumberMR44800-9624K4
Capacity384GB (4 x 96GB)
Type288-Pin DDR5 RDIMM
SpeedDDR5 5600 (PC5 44800)
CAS LatencyCL46
Voltage1.10V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx4
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemSupermicro
FeaturesDDR5 ECC RDIMM Motherboard Compatible
Package Content384GB 4X96GB DDR5 5600MHz PC5-44800 2Rx4 1.1V 288-PIN ECC RDIMM KIT

이 모델의 다른 버전

같은 라인업에서 5개 더

같은 제품군에서 메모리·쿨러·클럭이 다릅니다 — 결정 전에 비교해 보세요.

이 상품에 대한 질문

Will the 288-pin DDR5 RDIMM modules fit the Supermicro H14DST-FL memory slots?

Yes, the kit uses 288-pin DDR5 RDIMM form factor, which is the exact slot type required by the Supermicro H14DST-FL motherboard.

What is the correct DIMM population order when installing all four 96GB modules?

Install the four 2Rx4 modules following the population sequence shown in the Supermicro H14DST-FL manual; skipping the specified order can prevent the system from recognising the full 384GB capacity.

Do the modules have heat spreaders that could block adjacent DIMM slots or CPU coolers?

No heat spreaders are fitted on these RDIMMs, so they occupy only the standard module height and do not interfere with neighbouring slots or air coolers.

이 진열대의 다른 상품

고객들이 함께 비교한 상품

같은 진열대, 같은 체크아웃 — 코인 8종, 환율 잠금 30분.