Mēs pieņemam kriptovalūtu — lai tā, kas Jums pieder, varētu nopirkt īstu aparatūru.Maksājiet kriptovalūtā, iztērējiet to īstai aparatūrai. Bezmaksas apdrošināta piegāde visā pasaulē virs 399 $. Vienkāršas, nemarķētas kastes, sūtītas no Vācijas.Bezmaksas apdrošināta piegāde virs 399 $. Jūsu kurss tiek fiksēts uz 30 minūtēm, tiklīdz atveras kase.Kurss fiksēts uz 30 minūtēm. Katra prece ir aizzīmogota, tās sērijas numurs ir pārbaudīts, un uz to attiecas 24 mēnešu garantija.Aizzīmogots, 24 mēnešu garantija.

Uzraudzītās preces Pieteikties

NEMIX RAM

NEMIX RAM 1.5TB DDR5 4800 CL40 16x96GB RDIMM ECC Registered memory upgrade for Supermicro H13DSG-OM

SKU CH-GFKE-8ZMX6

1.5 TB DDR5 kit with sixteen 96 GB registered ECC modules at 4800 MHz CL40 1.1 V for Supermicro H13DSG-OM

  • Capacity1.5TB (16 x 96GB)
  • Type288-Pin DDR5 RDIMM
  • SpeedDDR5 4800 (PC5 38400)
  • CAS LatencyCL40
  • Voltage1.10V
  • ECCYes

Speed 4800MHz

  • 5 TB total capacity from sixteen 96 GB modules for maximum server density
  • DDR5-4800 (PC5-38400) speed with CL40 latency runs at rated frequency
  • Registered ECC design corrects single-bit errors and stabilises fully populated slots
  • 1 V operating voltage matches platform requirements exactly
  • 288-pin RDIMM form factor verified for Supermicro H13DSG-OM motherboard

1.5TB DDR5-4800 RDIMM kit for Supermicro H13DSG-OM

This 1.5TB kit contains 16 modules of 96GB each, built as 2Rx4 Registered ECC DDR5 RDIMMs. It is designed for the Supermicro H13DSG-OM motherboard, delivering the exact rank, voltage and timing the platform expects for full-capacity operation at rated speed.

288-pin Registered form factor with ECC

The 288-pin RDIMM modules fit the board's memory slots and use registered architecture to offload the memory controller when every slot is populated. ECC corrects single-bit errors on the fly, preventing silent data corruption and unplanned reboots in production environments.

1.1V operation at CL40 latency

Running at 1.10V, the kit operates at the standard DDR5-4800 voltage with CL40 timings. Registered buffering maintains signal integrity across all 16 modules at full capacity, supporting stable throughput under sustained server workloads.

Priekšrocības

  • 5 TB total capacity from sixteen 96 GB modules for maximum server density
  • DDR5-4800 (PC5-38400) speed with CL40 latency runs at rated frequency
  • Registered ECC design corrects single-bit errors and stabilises fully populated slots
  • 1 V operating voltage matches platform requirements exactly
  • 288-pin RDIMM form factor verified for Supermicro H13DSG-OM motherboard

Specifikācijas

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Server Memory
ModelDDR5 ECC RDIMM Registered Server Memory
Part NumberMR38400-9624K16
Capacity1.5TB (16 x 96GB)
Type288-Pin DDR5 RDIMM
SpeedDDR5 4800 (PC5 38400)
CAS LatencyCL40
Voltage1.10V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx4
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemSupermicro
FeaturesDDR5 ECC RDIMM Motherboard Compatible
Package Content1.5TB 16X96GB DDR5 4800MHz PC5-38400 2Rx4 1.1V 288-PIN ECC RDIMM KIT

Citas šī modeļa versijas

Vēl 5 šajā sērijā

Viena saime, taču atšķirīga atmiņa, dzesētājs vai frekvence — salīdziniet, pirms izlemjat.

Jautājumi par šo preci

What DDR5 speed and PC5 rating does this 1.5 TB kit run at?

The kit operates at DDR5 4800 with a PC5 38400 data rate, matching the Supermicro H13DSG-OM memory controller specification.

What physical form factor and pin count must the motherboard slots accept?

Each module is a 288-pin RDIMM, the registered DIMM form factor required by the H13DSG-OM; UDIMM or SODIMM slots will not fit.

In what order should the 16 modules be populated to avoid a no-post condition?

Follow the H13DSG-OM manual's DIMM population sequence exactly; installing all 16 x 96 GB modules in the wrong channel order is the most common cause of boot failure.

Arī šajā sadaļā

Klienti arī salīdzināja

Tas pats plaukts, tā pati kase — astoņas kriptovalūtas un kursa fiksēšana uz 30 minūtēm.