BFKK
BFKK 3U Rackmount Server Chassis EATX/ATX/MATX 4x5.25 6x3.5 Top/Side Cooling
- Rackmount
214,99 USD
0.0027736BTC
Raktáron
NEMIX RAM
NEMIX RAM 288GB 6x48GB DDR5 6400 CL52 1.1V ECC RDIMM Supermicro H14SST-GE memory upgrade
Six 48 GB DDR5 registered ECC modules running at 6400 MT/s with CL52 latency and 1.1 V for the Supermicro H14SST-GE server
- Capacity288GB (6 x 48GB)
- Type288-Pin DDR5 RDIMM
- SpeedDDR5 6400 (PC5 51200)
- CAS LatencyCL52
- Voltage1.10V
- ECCYes
- 288 GB total capacity for large workloads with six 48 GB modules
- DDR5 6400 speed transfers data at PC5-51200 bandwidth
- Registered ECC design corrects single-bit errors and buffers every slot
- CL52 latency at 1.10 V keeps timing tight and power low
- Verified fit for Supermicro H14SST-GE motherboard with 288-pin RDIMM form factor
Exact-match DDR5-6400 kit for Supermicro H14SST-GE
This 288GB kit contains six 48GB Registered ECC RDIMMs built to the board's required 2Rx8 rank structure and 1.1V operating voltage. Each module runs at DDR5-6400 (PC5-51200) with CL52 latency so the memory controller recognises the full capacity at rated speed. The 288-pin RDIMM form factor matches the slots on the H14SST-GE motherboard.
Sustained-load stability from registered ECC
Registered buffering reduces electrical load on the memory controller, allowing all six slots to stay fully populated at full frequency without signal degradation. On-die ECC detects and corrects single-bit errors in real time, preventing silent data corruption and unplanned reboots during continuous server workloads. The 1.1V default voltage keeps power draw consistent across long-running tasks.
2Rx8 rank layout is the decisive compatibility
The H14SST-GE memory population rules require this exact dual-rank x8 organisation; a different rank configuration will either not be recognised or will force the controller to down-clock the kit. Buyers whose boards call for 1Rx8 or 2Rx4 modules cannot use this kit. Verify the motherboard manual for approved DIMM population order before ordering.
Erősségek
- 288 GB total capacity for large workloads with six 48 GB modules
- DDR5 6400 speed transfers data at PC5-51200 bandwidth
- Registered ECC design corrects single-bit errors and buffers every slot
- CL52 latency at 1.10 V keeps timing tight and power low
- Verified fit for Supermicro H14SST-GE motherboard with 288-pin RDIMM form factor
Műszaki adatok
| Brand | NEMIX RAM |
|---|---|
| Series | NEMIX RAM Original Series Server Memory |
| Model | DDR5 ECC RDIMM Registered Server Memory |
| Part Number | MR51200-4828K6 |
| Capacity | 288GB (6 x 48GB) |
| Type | 288-Pin DDR5 RDIMM |
| Speed | DDR5 6400 (PC5 51200) |
| CAS Latency | CL52 |
| Voltage | 1.10V |
| ECC | Yes |
| Buffered/Registered | Registered |
| Rank | 2Rx8 |
| Chipset | Major OEM Samsung, Micron, Hynix |
| Heat Spreader | No |
| Compatible System | Supermicro |
| Features | DDR5 ECC RDIMM Motherboard Compatible |
| Package Content | 288GB 6X48GB DDR5 6400MHz PC5-51200 2Rx8 1.1V 288-PIN ECC RDIMM KIT |
Kérdések a termékről
How much power does the 1.1V DDR5 6400 kit draw when the Supermicro H14SST-GE runs fully populated all day?
Each 48 GB module operates at 1.10 V DDR5 standard voltage; total draw depends on the board's memory-controller load and population rules, so consult the motherboard manual for exact figures.
What must the Supermicro H14SST-GE already have to accept this 6 x 48 GB 2Rx8 RDIMM kit?
The board needs six free 288-pin DDR5 RDIMM slots and a BIOS that supports 2Rx8 registered ECC modules at PC5-51200 CL52; verify the approved population order in the manual before installing.
Will these CL52 registered ECC modules run alongside any older DDR5 RDIMMs I keep in the same server?
Mixing ranks, speeds or latencies can force the memory controller to down-clock all slots; for stable operation populate every channel with identical 2Rx8 CL52 modules per the board's population guide.
Szintén ezen a polcon
Vásárlók ezeket hasonlították össze
Ugyanaz a polc, ugyanaz a pénztár — nyolc pénznem és 30 perces árfolyamzár.
