暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料(保険付き)。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料(保険付き)。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン

NEMIX RAM

NEMIX RAM 288GB 6x48GB DDR5 6400 CL52 1.1V ECC RDIMM Supermicro H14SST-GE memory upgrade

SKU CH-AS1Q-4T8KD

Six 48 GB DDR5 registered ECC modules running at 6400 MT/s with CL52 latency and 1.1 V for the Supermicro H14SST-GE server

  • Capacity288GB (6 x 48GB)
  • Type288-Pin DDR5 RDIMM
  • SpeedDDR5 6400 (PC5 51200)
  • CAS LatencyCL52
  • Voltage1.10V
  • ECCYes
  • 288 GB total capacity for large workloads with six 48 GB modules
  • DDR5 6400 speed transfers data at PC5-51200 bandwidth
  • Registered ECC design corrects single-bit errors and buffers every slot
  • CL52 latency at 1.10 V keeps timing tight and power low
  • Verified fit for Supermicro H14SST-GE motherboard with 288-pin RDIMM form factor

Exact-match DDR5-6400 kit for Supermicro H14SST-GE

This 288GB kit contains six 48GB Registered ECC RDIMMs built to the board's required 2Rx8 rank structure and 1.1V operating voltage. Each module runs at DDR5-6400 (PC5-51200) with CL52 latency so the memory controller recognises the full capacity at rated speed. The 288-pin RDIMM form factor matches the slots on the H14SST-GE motherboard.

Sustained-load stability from registered ECC

Registered buffering reduces electrical load on the memory controller, allowing all six slots to stay fully populated at full frequency without signal degradation. On-die ECC detects and corrects single-bit errors in real time, preventing silent data corruption and unplanned reboots during continuous server workloads. The 1.1V default voltage keeps power draw consistent across long-running tasks.

2Rx8 rank layout is the decisive compatibility

The H14SST-GE memory population rules require this exact dual-rank x8 organisation; a different rank configuration will either not be recognised or will force the controller to down-clock the kit. Buyers whose boards call for 1Rx8 or 2Rx4 modules cannot use this kit. Verify the motherboard manual for approved DIMM population order before ordering.

特長

  • 288 GB total capacity for large workloads with six 48 GB modules
  • DDR5 6400 speed transfers data at PC5-51200 bandwidth
  • Registered ECC design corrects single-bit errors and buffers every slot
  • CL52 latency at 1.10 V keeps timing tight and power low
  • Verified fit for Supermicro H14SST-GE motherboard with 288-pin RDIMM form factor

仕様

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Server Memory
ModelDDR5 ECC RDIMM Registered Server Memory
Part NumberMR51200-4828K6
Capacity288GB (6 x 48GB)
Type288-Pin DDR5 RDIMM
SpeedDDR5 6400 (PC5 51200)
CAS LatencyCL52
Voltage1.10V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx8
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemSupermicro
FeaturesDDR5 ECC RDIMM Motherboard Compatible
Package Content288GB 6X48GB DDR5 6400MHz PC5-51200 2Rx8 1.1V 288-PIN ECC RDIMM KIT

この商品に関する質問

How much power does the 1.1V DDR5 6400 kit draw when the Supermicro H14SST-GE runs fully populated all day?

Each 48 GB module operates at 1.10 V DDR5 standard voltage; total draw depends on the board's memory-controller load and population rules, so consult the motherboard manual for exact figures.

What must the Supermicro H14SST-GE already have to accept this 6 x 48 GB 2Rx8 RDIMM kit?

The board needs six free 288-pin DDR5 RDIMM slots and a BIOS that supports 2Rx8 registered ECC modules at PC5-51200 CL52; verify the approved population order in the manual before installing.

Will these CL52 registered ECC modules run alongside any older DDR5 RDIMMs I keep in the same server?

Mixing ranks, speeds or latencies can force the memory controller to down-clock all slots; for stable operation populate every channel with identical 2Rx8 CL52 modules per the board's population guide.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。