BFKK
BFKK 3U Rackmount Server Chassis EATX/ATX/MATX 4x5.25 6x3.5 Top/Side Cooling
- Rackmount
214,99 USD
0.0027736BTC
Raktáron
NEMIX RAM
NEMIX RAM 32GB (4×8GB) DDR4 2933MHz CL21 1.2V 288-pin UDIMM memory upgrade
Four-module kit adds 32 GB of DDR4-2933 CL21 memory at 1.2 V for Supermicro workstations
- Capacity32GB (4 x 8GB)
- SpeedDDR4 2933 (PC4 23400)
- ECCNo
- Buffered/RegisteredUnbuffered
- ChipsetMajor OEM Samsung, Micron, Hynix
- Voltage1.20V
- 32GB total capacity across four 8GB modules for expanded multitasking headroom
- DDR4 2933MHz speed rated at PC4-23400 for responsive data throughput
- CL21 CAS latency at 1.20V operation balancing timing and power efficiency
- 288-pin UDIMM form factor fits standard desktop DIMM slots without adapters
- Built with major OEM Samsung, Micron, Hynix chips validated for Supermicro workstation compatibility
SuperMicro DDR4 2933MHz Kit
This 32GB kit contains four 8GB unbuffered UDIMM modules validated for Supermicro platforms. It targets IT professionals and enthusiast builders who need a straightforward memory upgrade for compatible Supermicro desktop or workstation boards.
CL21 1.2V unbuffered modules
The kit delivers DDR4 2933 speed at CL21 latency with a standard 1.2V operating voltage. No heat spreaders are fitted, keeping the modules low-profile for dense configurations. Each module uses a 1Rx8 organisation built from major OEM Samsung, Micron or Hynix components.
32GB capacity headroom
The four-slot population provides 32GB total, suitable for multi-threaded workloads and virtualisation on supported Supermicro systems. Non-ECC unbuffered design means it is not intended for platforms that require registered or error-correcting memory.
Erősségek
- 32GB total capacity across four 8GB modules for expanded multitasking headroom
- DDR4 2933MHz speed rated at PC4-23400 for responsive data throughput
- CL21 CAS latency at 1.20V operation balancing timing and power efficiency
- 288-pin UDIMM form factor fits standard desktop DIMM slots without adapters
- Built with major OEM Samsung, Micron, Hynix chips validated for Supermicro workstation compatibility
Műszaki adatok
| Brand | NEMIX RAM |
|---|---|
| Series | SuperMicro Server/Workstation Compatible Series Memory |
| Model | SuperMicro DDR4 2933MHZ Non-ECC Unbuffered UDIMM |
| Part Number | MD23400-818K4 |
| Capacity | 32GB (4 x 8GB) |
| Speed | DDR4 2933 (PC4 23400) |
| ECC | No |
| Buffered/Registered | Unbuffered |
| Chipset | Major OEM Samsung, Micron, Hynix |
| Voltage | 1.20V |
| Compatible System | Supermicro |
| CAS Latency | CL21 |
| Heat Spreader | No |
| Type | 288-Pin DDR4 UDIMM |
| Rank | 1Rx8 |
| Features | DDR4 Non-ECC Unbuffered UDIMM Motherboard Compatible |
| Package Content | 32GB (4X8GB) DDR4 2933MHZ PC4-23400 1Rx8 1.2V CL21 288-PIN Non-ECC Unbuffered UDIMM KIT |
Kérdések a termékről
Will the 1Rx8 DDR4 modules need any firmware updates or thermal-pad replacements over time?
No firmware or thermal pads are involved; the unbuffered DDR4 sticks run at 1.2 V without heat spreaders and have no serviceable parts.
What speed ceiling appears first when the 2933 MHz kit runs continuously under load?
The JEDEC-rated 2933 MT/s with CL21 latency is the fixed operating point; there is no higher profile to hit.
How much heat and fan noise should I expect from the four 8 GB sticks at 1.2 V all day?
At 1.2 V the modules stay cool enough to run passively, adding negligible heat or noise inside a normal chassis.
Szintén ezen a polcon
Vásárlók ezeket hasonlították össze
Ugyanaz a polc, ugyanaz a pénztár — nyolc pénznem és 30 perces árfolyamzár.
