我們接受加密貨幣付款 — 讓您持有的幣種也能買到真正的硬體設備。以加密貨幣付款，直接購入真正的硬體設備。 全球訂單滿 US$399，即享免費保險運送。簡約外箱，不印任何品牌標誌，從德國出貨。訂單滿 US$399，即享免費保險運送。 結帳一開始，您的匯率即鎖定 30 分鐘。匯率鎖定 30 分鐘。 每件商品皆原廠密封、序號經過核對，並享有 24 個月保固。原廠密封，保固 24 個月。

追蹤清單 登入
Four green DDR4 UDIMM sticks without heat spreaders

NEMIX RAM

NEMIX RAM 32GB (4×8GB) DDR4 2933MHz CL21 1.2V 288-pin UDIMM memory upgrade

SKU CH-BNP0-CMH0M

Four-module kit adds 32 GB of DDR4-2933 CL21 memory at 1.2 V for Supermicro workstations

  • Capacity32GB (4 x 8GB)
  • SpeedDDR4 2933 (PC4 23400)
  • ECCNo
  • Buffered/RegisteredUnbuffered
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • Voltage1.20V
  • 32GB total capacity across four 8GB modules for expanded multitasking headroom
  • DDR4 2933MHz speed rated at PC4-23400 for responsive data throughput
  • CL21 CAS latency at 1.20V operation balancing timing and power efficiency
  • 288-pin UDIMM form factor fits standard desktop DIMM slots without adapters
  • Built with major OEM Samsung, Micron, Hynix chips validated for Supermicro workstation compatibility

SuperMicro DDR4 2933MHz Kit

This 32GB kit contains four 8GB unbuffered UDIMM modules validated for Supermicro platforms. It targets IT professionals and enthusiast builders who need a straightforward memory upgrade for compatible Supermicro desktop or workstation boards.

CL21 1.2V unbuffered modules

The kit delivers DDR4 2933 speed at CL21 latency with a standard 1.2V operating voltage. No heat spreaders are fitted, keeping the modules low-profile for dense configurations. Each module uses a 1Rx8 organisation built from major OEM Samsung, Micron or Hynix components.

32GB capacity headroom

The four-slot population provides 32GB total, suitable for multi-threaded workloads and virtualisation on supported Supermicro systems. Non-ECC unbuffered design means it is not intended for platforms that require registered or error-correcting memory.

商品特色

  • 32GB total capacity across four 8GB modules for expanded multitasking headroom
  • DDR4 2933MHz speed rated at PC4-23400 for responsive data throughput
  • CL21 CAS latency at 1.20V operation balancing timing and power efficiency
  • 288-pin UDIMM form factor fits standard desktop DIMM slots without adapters
  • Built with major OEM Samsung, Micron, Hynix chips validated for Supermicro workstation compatibility

商品規格

BrandNEMIX RAM
SeriesSuperMicro Server/Workstation Compatible Series Memory
ModelSuperMicro DDR4 2933MHZ Non-ECC Unbuffered UDIMM
Part NumberMD23400-818K4
Capacity32GB (4 x 8GB)
SpeedDDR4 2933 (PC4 23400)
ECCNo
Buffered/RegisteredUnbuffered
ChipsetMajor OEM Samsung, Micron, Hynix
Voltage1.20V
Compatible SystemSupermicro
CAS LatencyCL21
Heat SpreaderNo
Type288-Pin DDR4 UDIMM
Rank1Rx8
FeaturesDDR4 Non-ECC Unbuffered UDIMM Motherboard Compatible
Package Content32GB (4X8GB) DDR4 2933MHZ PC4-23400 1Rx8 1.2V CL21 288-PIN Non-ECC Unbuffered UDIMM KIT

商品問答

Will the 1Rx8 DDR4 modules need any firmware updates or thermal-pad replacements over time?

No firmware or thermal pads are involved; the unbuffered DDR4 sticks run at 1.2 V without heat spreaders and have no serviceable parts.

What speed ceiling appears first when the 2933 MHz kit runs continuously under load?

The JEDEC-rated 2933 MT/s with CL21 latency is the fixed operating point; there is no higher profile to hit.

How much heat and fan noise should I expect from the four 8 GB sticks at 1.2 V all day?

At 1.2 V the modules stay cool enough to run passively, adding negligible heat or noise inside a normal chassis.

同類商品

顧客也比較過

同一分類，同一套結帳流程 — 支援八種加密貨幣，匯率鎖定 30 分鐘。