BFKK
BFKK 3U Rackmount Server Chassis EATX/ATX/MATX 4x5.25 6x3.5 Top/Side Cooling
- Rackmount
214,99 USD
0.00277977BTC
Raktáron
NEMIX RAM
NEMIX RAM 512GB (16x32GB) DDR5 4800 CL40 ECC RDIMM Cisco UCS X410c M7 memory upgrade
A 512 GB DDR5 4800 CL40 ECC registered kit of sixteen 32 GB 1Rx4 modules at 1.1 V for Cisco UCS X410c M7 compute nodes
- Capacity512GB (16 x 32GB)
- SpeedDDR5 4800 (PC5 38400)
- ECCYes
- Buffered/RegisteredRegistered
- ChipsetMajor OEM Samsung, Micron, Hynix
- Voltage1.10V
- 512 GB total capacity from 16 modules of 32 GB each
- DDR5 4800 speed with PC5-38400 bandwidth for high-throughput workloads
- ECC registered RDIMM design protects data integrity in mission-critical servers
- 1 V operating voltage reduces power draw across the full kit
- Validated for Cisco UCS X410c M7 compute node compatibility
Cisco UCS X410c M7 512GB kit
This 512GB kit contains sixteen 32GB DDR5 4800 CL40 ECC registered DIMMs built for the Cisco UCS X410c M7 compute node. It targets IT teams who need maximum memory capacity in a single server chassis. The modules run at 1.1V and use a 288-pin RDIMM form factor with 1Rx4 organisation.
Capacity and headroom for dense workloads
Sixteen slots filled with 32GB modules deliver 512GB total, supporting large in-memory databases, virtualisation clusters and high-thread-count applications. The registered design and ECC protect data integrity under sustained load. Headroom ends when all DIMM slots are populated or when workloads exceed the platform’s supported memory ceiling.
Kit contents simplify deployment
The package ships as a matched 16-module set with part number MR38400-314K16, eliminating the need to source and validate individual sticks. Modules use major OEM DRAM from Samsung, Micron or Hynix and are stress-tested before dispatch. No heat spreaders are included, so airflow planning follows the server vendor’s guidelines.
Erősségek
- 512 GB total capacity from 16 modules of 32 GB each
- DDR5 4800 speed with PC5-38400 bandwidth for high-throughput workloads
- ECC registered RDIMM design protects data integrity in mission-critical servers
- 1 V operating voltage reduces power draw across the full kit
- Validated for Cisco UCS X410c M7 compute node compatibility
Műszaki adatok
| Brand | NEMIX RAM |
|---|---|
| Series | Cisco Server Compatible Series Memory |
| Model | Cisco DDR5 4800MHZ ECC RDIMM Registered Server Memory |
| Part Number | MR38400-314K16 |
| Capacity | 512GB (16 x 32GB) |
| Speed | DDR5 4800 (PC5 38400) |
| ECC | Yes |
| Buffered/Registered | Registered |
| Chipset | Major OEM Samsung, Micron, Hynix |
| Voltage | 1.10V |
| Compatible System | Cisco |
| CAS Latency | CL40 |
| Heat Spreader | No |
| Type | 288-Pin DDR5 RDIMM |
| Rank | 1Rx4 |
| Features | DDR5 ECC Registered RDIMM Server Motherboard Compatible |
| Package Content | 512GB (16X32GB) DDR5 4800MHZ PC5-38400 1Rx4 1.1V CL40 288-PIN ECC RDIMM Registered Server Memory |
Kérdések a termékről
Will these 16 modules of 32 GB DDR5 4800 CL40 ECC RDIMM work with the memory already installed in my Cisco UCS X410c M7?
The kit supplies sixteen 32 GB DDR5 4800 CL40 ECC registered DIMMs at 1.10 V. Matching speed, voltage, rank and ECC type lets them run alongside identical modules already in the system.
How can I verify the full 512 GB kit is running at DDR5 4800 CL40 with ECC active after installation?
Enter the Cisco UCS X410c M7 BIOS or UEFI and confirm the memory shows 512 GB at 4800 MT/s, CL40 latency, 1.10 V and ECC enabled for each of the 16 slots.
Does the package include only the 16 DDR5 4800 CL40 ECC RDIMM modules or are any cables or brackets supplied?
The box contains the 512 GB kit as sixteen 32 GB 288-pin DDR5 4800 CL40 1Rx4 ECC registered DIMMs. No cables, brackets or additional hardware are included.
Szintén ezen a polcon
Vásárlók ezeket hasonlították össze
Ugyanaz a polc, ugyanaz a pénztár — nyolc pénznem és 30 perces árfolyamzár.
BFKK
BFKK 2U Micro ATX Rackmount 2×5.25" 4×3.5" Side 80mm Fan
- Rackmount
216,99 USD
0.00280563BTC
Raktáron
