暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料（保険付き）。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料（保険付き）。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン
Sixteen green DDR5 RDIMM modules in static bags

NEMIX RAM

NEMIX RAM 512GB (16x32GB) DDR5 4800 CL40 ECC RDIMM Cisco UCS X410c M7 memory upgrade

SKU CH-VFPY-HZBGD

A 512 GB DDR5 4800 CL40 ECC registered kit of sixteen 32 GB 1Rx4 modules at 1.1 V for Cisco UCS X410c M7 compute nodes

  • Capacity512GB (16 x 32GB)
  • SpeedDDR5 4800 (PC5 38400)
  • ECCYes
  • Buffered/RegisteredRegistered
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • Voltage1.10V
  • 512 GB total capacity from 16 modules of 32 GB each
  • DDR5 4800 speed with PC5-38400 bandwidth for high-throughput workloads
  • ECC registered RDIMM design protects data integrity in mission-critical servers
  • 1 V operating voltage reduces power draw across the full kit
  • Validated for Cisco UCS X410c M7 compute node compatibility

Cisco UCS X410c M7 512GB kit

This 512GB kit contains sixteen 32GB DDR5 4800 CL40 ECC registered DIMMs built for the Cisco UCS X410c M7 compute node. It targets IT teams who need maximum memory capacity in a single server chassis. The modules run at 1.1V and use a 288-pin RDIMM form factor with 1Rx4 organisation.

Capacity and headroom for dense workloads

Sixteen slots filled with 32GB modules deliver 512GB total, supporting large in-memory databases, virtualisation clusters and high-thread-count applications. The registered design and ECC protect data integrity under sustained load. Headroom ends when all DIMM slots are populated or when workloads exceed the platform’s supported memory ceiling.

Kit contents simplify deployment

The package ships as a matched 16-module set with part number MR38400-314K16, eliminating the need to source and validate individual sticks. Modules use major OEM DRAM from Samsung, Micron or Hynix and are stress-tested before dispatch. No heat spreaders are included, so airflow planning follows the server vendor’s guidelines.

特長

  • 512 GB total capacity from 16 modules of 32 GB each
  • DDR5 4800 speed with PC5-38400 bandwidth for high-throughput workloads
  • ECC registered RDIMM design protects data integrity in mission-critical servers
  • 1 V operating voltage reduces power draw across the full kit
  • Validated for Cisco UCS X410c M7 compute node compatibility

仕様

BrandNEMIX RAM
SeriesCisco Server Compatible Series Memory
ModelCisco DDR5 4800MHZ ECC RDIMM Registered Server Memory
Part NumberMR38400-314K16
Capacity512GB (16 x 32GB)
SpeedDDR5 4800 (PC5 38400)
ECCYes
Buffered/RegisteredRegistered
ChipsetMajor OEM Samsung, Micron, Hynix
Voltage1.10V
Compatible SystemCisco
CAS LatencyCL40
Heat SpreaderNo
Type288-Pin DDR5 RDIMM
Rank1Rx4
FeaturesDDR5 ECC Registered RDIMM Server Motherboard Compatible
Package Content512GB (16X32GB) DDR5 4800MHZ PC5-38400 1Rx4 1.1V CL40 288-PIN ECC RDIMM Registered Server Memory

この商品に関する質問

Will these 16 modules of 32 GB DDR5 4800 CL40 ECC RDIMM work with the memory already installed in my Cisco UCS X410c M7?

The kit supplies sixteen 32 GB DDR5 4800 CL40 ECC registered DIMMs at 1.10 V. Matching speed, voltage, rank and ECC type lets them run alongside identical modules already in the system.

How can I verify the full 512 GB kit is running at DDR5 4800 CL40 with ECC active after installation?

Enter the Cisco UCS X410c M7 BIOS or UEFI and confirm the memory shows 512 GB at 4800 MT/s, CL40 latency, 1.10 V and ECC enabled for each of the 16 slots.

Does the package include only the 16 DDR5 4800 CL40 ECC RDIMM modules or are any cables or brackets supplied?

The box contains the 512 GB kit as sixteen 32 GB 288-pin DDR5 4800 CL40 1Rx4 ECC registered DIMMs. No cables, brackets or additional hardware are included.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。