Elfogadjuk a kriptovalutát — így az Ön birtokában lévő érmékből valódi hardvert vásárolhat.Fizessen kriptóval, és költse el valódi hardverre. 399 $ felett világszerte díjmentes a biztosított szállítás. Egyszerű, jelöletlen külső kartonok, Németországból küldve.399 $ felett díjmentes a biztosított szállítás. Az Ön árfolyama a pénztár megnyitásától számított 30 percre zárolva marad.Árfolyam zárolva 30 percre. Minden termék gyárilag zárt, sorozatszáma ellenőrzött, és 24 hónapos garancia fedezi.Zárt csomagolás, 24 hónap garancia.

Árfigyelő lista Bejelentkezés
Green circuit board with black memory chips, gold edge connector, no heat spreader

NEMIX RAM

NEMIX RAM 8GB DDR4 2133 PC4-17000 CL15 2Rx8 1.2V 288-Pin UDIMM Samsung M378A1G43DB0-CPB memory upgrade

SKU CH-5BD0-0F3X7

8GB DDR4 2133 PC4-17000 CL15 2Rx8 1.2V 288-pin UDIMM for Samsung systems

  • Capacity8GB
  • SpeedDDR4 2133 (PC4 17000)
  • ECCNo
  • Buffered/RegisteredUnbuffered
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • Voltage1.20V
  • 8GB capacity adds responsive multitasking headroom
  • DDR4 2133 speed matches system memory bus
  • CL15 latency keeps data access tight
  • 20V operation reduces power draw and heat
  • 288-pin UDIMM fits standard desktop DIMM slots

8GB DDR4 2133 UDIMM for Samsung Systems

This 8GB DDR4 2133 module is built for Samsung desktop PCs that require PC4-17000 unbuffered memory. It fits 288-pin UDIMM slots and runs at the standard 1.20V voltage. The CL15 latency and 2Rx8 organisation match the Samsung M378A1G43DB0-CPB specification for direct compatibility.

Sustained load stability with major OEM chips

Modules use Samsung, Micron or Hynix components that are stress-tested under load before shipping. The unbuffered non-ECC design delivers consistent throughput during extended workloads without the overhead of registered buffers. Operation stays within the rated 2133 MT/s speed and 1.2V envelope throughout.

Straightforward UDIMM installation

The 288-pin UDIMM form factor seats in standard desktop DIMM slots without tools. No heat spreader is fitted, so clearance inside compact chassis is not an issue. Builders should verify that the motherboard accepts 2Rx8 non-ECC modules at 1.2V; systems requiring ECC or registered memory will not work with this kit.

Erősségek

  • 8GB capacity adds responsive multitasking headroom
  • DDR4 2133 speed matches system memory bus
  • CL15 latency keeps data access tight
  • 20V operation reduces power draw and heat
  • 288-pin UDIMM fits standard desktop DIMM slots

Műszaki adatok

BrandNEMIX RAM
SeriesSamsung Desktop PC Compatible Series Memory
ModelSamsung DDR4 2133MHZ Non-ECC Unbuffered UDIMM
Part NumberMD17000-828K1
Capacity8GB
SpeedDDR4 2133 (PC4 17000)
ECCNo
Buffered/RegisteredUnbuffered
ChipsetMajor OEM Samsung, Micron, Hynix
Voltage1.20V
Compatible SystemSamsung
CAS LatencyCL15
Heat SpreaderNo
Type288-Pin DDR4 UDIMM
Rank2Rx8
FeaturesDDR4 Non- ECC Unbuffered UDIMM Motherboard Compatible
Package Content8GB (1X8GB) DDR4 2133MHZ PC4-17000 2Rx8 1.2V CL15 288-PIN Non-ECC Unbuffered UDIMM

Kérdések a termékről

Does the 1.2 V DDR4 2133 module run hot or draw extra power during all-day workloads?

It operates at the standard 1.2 V DDR4 voltage with no heat spreader, so power draw and thermals stay within normal JEDEC limits for continuous use.

What motherboard slot and chipset support must I already have for this 288-pin UDIMM to work?

A desktop board with a DDR4 288-pin UDIMM slot and a memory controller that accepts 2133 MT/s CL15 unbuffered non-ECC modules.

Will this 2Rx8 CL15 stick run stably alongside older DDR4 2133 modules I keep in the other slots?

Yes, if the existing modules are also DDR4 2133 unbuffered non-ECC; the memory controller will train all slots to the lowest common speed and latency.

Szintén ezen a polcon

Vásárlók ezeket hasonlították össze

Ugyanaz a polc, ugyanaz a pénztár — nyolc pénznem és 30 perces árfolyamzár.