Priimame kriptovaliutą — taip monetos, kurias turite, gali nupirkti tikrą techniką.Mokėkite kriptovaliuta, išleiskite ją tikrai technikai. Nemokamas apdraustas pristatymas visame pasaulyje virš 399 $. Paprastos, be žymų siuntos dėžės, siunčiamos iš Vokietijos.Nemokamas apdraustas pristatymas virš 399 $. Jūsų kursas fiksuojamas 30 minučių, kai tik prasideda atsiskaitymas.Kursas fiksuojamas 30 minučių. Kiekvienas gaminys užplombuotas, jo serijos numeris patikrintas, ir jam taikoma 24 mėnesių garantija.Užplombuota, 24 mėnesių garantija.

Stebimos prekės Prisijungti
Green circuit board with black memory chips, gold edge connector, no heat spreader

NEMIX RAM

NEMIX RAM 8GB DDR4 2133 PC4-17000 CL15 2Rx8 1.2V 288-Pin UDIMM Samsung M378A1G43DB0-CPB memory upgrade

SKU CH-5BD0-0F3X7

8GB DDR4 2133 PC4-17000 CL15 2Rx8 1.2V 288-pin UDIMM for Samsung systems

  • Capacity8GB
  • SpeedDDR4 2133 (PC4 17000)
  • ECCNo
  • Buffered/RegisteredUnbuffered
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • Voltage1.20V
  • 8GB capacity adds responsive multitasking headroom
  • DDR4 2133 speed matches system memory bus
  • CL15 latency keeps data access tight
  • 20V operation reduces power draw and heat
  • 288-pin UDIMM fits standard desktop DIMM slots

8GB DDR4 2133 UDIMM for Samsung Systems

This 8GB DDR4 2133 module is built for Samsung desktop PCs that require PC4-17000 unbuffered memory. It fits 288-pin UDIMM slots and runs at the standard 1.20V voltage. The CL15 latency and 2Rx8 organisation match the Samsung M378A1G43DB0-CPB specification for direct compatibility.

Sustained load stability with major OEM chips

Modules use Samsung, Micron or Hynix components that are stress-tested under load before shipping. The unbuffered non-ECC design delivers consistent throughput during extended workloads without the overhead of registered buffers. Operation stays within the rated 2133 MT/s speed and 1.2V envelope throughout.

Straightforward UDIMM installation

The 288-pin UDIMM form factor seats in standard desktop DIMM slots without tools. No heat spreader is fitted, so clearance inside compact chassis is not an issue. Builders should verify that the motherboard accepts 2Rx8 non-ECC modules at 1.2V; systems requiring ECC or registered memory will not work with this kit.

Privalumai

  • 8GB capacity adds responsive multitasking headroom
  • DDR4 2133 speed matches system memory bus
  • CL15 latency keeps data access tight
  • 20V operation reduces power draw and heat
  • 288-pin UDIMM fits standard desktop DIMM slots

Specifikacijos

BrandNEMIX RAM
SeriesSamsung Desktop PC Compatible Series Memory
ModelSamsung DDR4 2133MHZ Non-ECC Unbuffered UDIMM
Part NumberMD17000-828K1
Capacity8GB
SpeedDDR4 2133 (PC4 17000)
ECCNo
Buffered/RegisteredUnbuffered
ChipsetMajor OEM Samsung, Micron, Hynix
Voltage1.20V
Compatible SystemSamsung
CAS LatencyCL15
Heat SpreaderNo
Type288-Pin DDR4 UDIMM
Rank2Rx8
FeaturesDDR4 Non- ECC Unbuffered UDIMM Motherboard Compatible
Package Content8GB (1X8GB) DDR4 2133MHZ PC4-17000 2Rx8 1.2V CL15 288-PIN Non-ECC Unbuffered UDIMM

Klausimai apie šią prekę

Does the 1.2 V DDR4 2133 module run hot or draw extra power during all-day workloads?

It operates at the standard 1.2 V DDR4 voltage with no heat spreader, so power draw and thermals stay within normal JEDEC limits for continuous use.

What motherboard slot and chipset support must I already have for this 288-pin UDIMM to work?

A desktop board with a DDR4 288-pin UDIMM slot and a memory controller that accepts 2133 MT/s CL15 unbuffered non-ECC modules.

Will this 2Rx8 CL15 stick run stably alongside older DDR4 2133 modules I keep in the other slots?

Yes, if the existing modules are also DDR4 2133 unbuffered non-ECC; the memory controller will train all slots to the lowest common speed and latency.

Taip pat šiame skyriuje

Kiti pirkėjai taip pat lygino

Ta pati lentyna, tas pats atsiskaitymas — aštuonios monetos ir 30 minučių fiksuotas kursas.