BFKK
BFKK 3U Rackmount Server Chassis EATX/ATX/MATX 4x5.25 6x3.5 Top/Side Cooling
- Rackmount
214,99 USD
0.00277185BTC
Raktáron
NEMIX RAM
NEMIX RAM 8GB DDR4 3200 CL22 260-Pin SODIMM POSIFLEX EK-2150 memory upgrade
8GB DDR4 3200 CL22 SODIMM upgrades POSIFLEX EK-2150 kiosks with 1.20V unbuffered memory
- Capacity8GB
- SpeedDDR4 3200 (PC4 25600)
- ECCNo
- Buffered/RegisteredUnbuffered
- ChipsetMajor OEM Samsung, Micron, Hynix
- Voltage1.20V
- Designed for POSIFLEX EK-2150 kiosks ensuring reliable operation
- 8 GB DDR4 3200 MHz module boosts multitasking headroom
- CL22 latency at 1.20 V balances speed with efficiency
- 260-pin SODIMM form factor fits the target motherboard slot
- Built with major OEM chips and stress-tested for stability
POSIFLEX EK-2150 compatible SODIMM
This 8 GB DDR4 module is built specifically for the POSIFLEX EK-2150 Mercury Series kiosk. It uses a 260-pin SODIMM form factor and runs at 3200 MHz with a CAS latency of 22. The unbuffered, non-ECC design matches the original system requirements for straightforward installation.
Sustained-load behaviour
Each module is stress-tested under load before shipping to verify stability during continuous operation. The 1.20 V operating voltage and 2Rx8 organisation help maintain consistent throughput in always-on retail and hospitality environments. Major OEM DRAM from Samsung, Micron or Hynix supports reliable long-term performance.
Pre-installation checks
Confirm that your EK-2150 chassis accepts a single 260-pin SODIMM and that the BIOS recognises PC4-25600 speed. Verify the memory slot is accessible without specialised tools and that no larger capacity or ECC module is required by your application. Ensure the system is powered down and anti-static precautions are observed before fitting the upgrade.
Erősségek
- Designed for POSIFLEX EK-2150 kiosks ensuring reliable operation
- 8 GB DDR4 3200 MHz module boosts multitasking headroom
- CL22 latency at 1.20 V balances speed with efficiency
- 260-pin SODIMM form factor fits the target motherboard slot
- Built with major OEM chips and stress-tested for stability
Műszaki adatok
| Brand | NEMIX RAM |
|---|---|
| Series | POSIFLEX POS Series Point of Sale Kiosk Memory |
| Model | POSIFLEX POS DDR4 3200MHZ Non-ECC Unbuffered SODIMM |
| Part Number | MS25600-828K1 |
| Capacity | 8GB |
| Speed | DDR4 3200 (PC4 25600) |
| ECC | No |
| Buffered/Registered | Unbuffered |
| Chipset | Major OEM Samsung, Micron, Hynix |
| Voltage | 1.20V |
| Compatible System | POSIFLEX POS |
| CAS Latency | CL22 |
| Heat Spreader | No |
| Type | 260-Pin DDR4 SODIMM |
| Rank | 2Rx8 |
| Features | DDR4 Non-ECC Unbuffered SODIMM Motherboard Compatible |
| Package Content | 8GB (1X8GB) DDR4 3200MHZ PC4-25600 2Rx8 1.2V CL22 260-PIN Non-ECC Unbuffered SODIMM |
Kérdések a termékről
How much heat and power does the 1.2 V DDR4 SODIMM draw during continuous kiosk operation?
The module runs at 1.20 V standard DDR4 voltage with no heat spreader, so thermal output stays low inside the POSIFLEX EK-2150 chassis.
What slot and form factor does the POSIFLEX EK-2150 need to accept this 260-pin upgrade?
The system must provide a DDR4 SO-DIMM socket that supports 260-pin unbuffered non-ECC modules at PC4-25600 speed.
Will this CL22 3200 MT/s stick run stably alongside any existing memory already installed in the EK-2150?
It is validated for the POSIFLEX EK-2150 Mercury Series kiosk and uses major OEM chips for broad compatibility with factory-installed DDR4.
Szintén ezen a polcon
Vásárlók ezeket hasonlították össze
Ugyanaz a polc, ugyanaz a pénztár — nyolc pénznem és 30 perces árfolyamzár.
BFKK
BFKK 2U Micro ATX Rackmount 2×5.25" 4×3.5" Side 80mm Fan
- Rackmount
216,99 USD
0.00279763BTC
Raktáron
