我們接受加密貨幣付款 — 讓您持有的幣種也能買到真正的硬體設備。以加密貨幣付款，直接購入真正的硬體設備。 全球訂單滿 US$399，即享免費保險運送。簡約外箱，不印任何品牌標誌，從德國出貨。訂單滿 US$399，即享免費保險運送。 結帳一開始，您的匯率即鎖定 30 分鐘。匯率鎖定 30 分鐘。 每件商品皆原廠密封、序號經過核對，並享有 24 個月保固。原廠密封，保固 24 個月。

追蹤清單 登入
Green circuit board SODIMM with black memory chips and gold edge connector

NEMIX RAM

NEMIX RAM 8GB DDR4 3200 CL22 260-Pin SODIMM POSIFLEX EK-2150 memory upgrade

SKU CH-MEJZ-H788H

8GB DDR4 3200 CL22 SODIMM upgrades POSIFLEX EK-2150 kiosks with 1.20V unbuffered memory

  • Capacity8GB
  • SpeedDDR4 3200 (PC4 25600)
  • ECCNo
  • Buffered/RegisteredUnbuffered
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • Voltage1.20V
  • Designed for POSIFLEX EK-2150 kiosks ensuring reliable operation
  • 8 GB DDR4 3200 MHz module boosts multitasking headroom
  • CL22 latency at 1.20 V balances speed with efficiency
  • 260-pin SODIMM form factor fits the target motherboard slot
  • Built with major OEM chips and stress-tested for stability

POSIFLEX EK-2150 compatible SODIMM

This 8 GB DDR4 module is built specifically for the POSIFLEX EK-2150 Mercury Series kiosk. It uses a 260-pin SODIMM form factor and runs at 3200 MHz with a CAS latency of 22. The unbuffered, non-ECC design matches the original system requirements for straightforward installation.

Sustained-load behaviour

Each module is stress-tested under load before shipping to verify stability during continuous operation. The 1.20 V operating voltage and 2Rx8 organisation help maintain consistent throughput in always-on retail and hospitality environments. Major OEM DRAM from Samsung, Micron or Hynix supports reliable long-term performance.

Pre-installation checks

Confirm that your EK-2150 chassis accepts a single 260-pin SODIMM and that the BIOS recognises PC4-25600 speed. Verify the memory slot is accessible without specialised tools and that no larger capacity or ECC module is required by your application. Ensure the system is powered down and anti-static precautions are observed before fitting the upgrade.

商品特色

  • Designed for POSIFLEX EK-2150 kiosks ensuring reliable operation
  • 8 GB DDR4 3200 MHz module boosts multitasking headroom
  • CL22 latency at 1.20 V balances speed with efficiency
  • 260-pin SODIMM form factor fits the target motherboard slot
  • Built with major OEM chips and stress-tested for stability

商品規格

BrandNEMIX RAM
SeriesPOSIFLEX POS Series Point of Sale Kiosk Memory
ModelPOSIFLEX POS DDR4 3200MHZ Non-ECC Unbuffered SODIMM
Part NumberMS25600-828K1
Capacity8GB
SpeedDDR4 3200 (PC4 25600)
ECCNo
Buffered/RegisteredUnbuffered
ChipsetMajor OEM Samsung, Micron, Hynix
Voltage1.20V
Compatible SystemPOSIFLEX POS
CAS LatencyCL22
Heat SpreaderNo
Type260-Pin DDR4 SODIMM
Rank2Rx8
FeaturesDDR4 Non-ECC Unbuffered SODIMM Motherboard Compatible
Package Content8GB (1X8GB) DDR4 3200MHZ PC4-25600 2Rx8 1.2V CL22 260-PIN Non-ECC Unbuffered SODIMM

商品問答

How much heat and power does the 1.2 V DDR4 SODIMM draw during continuous kiosk operation?

The module runs at 1.20 V standard DDR4 voltage with no heat spreader, so thermal output stays low inside the POSIFLEX EK-2150 chassis.

What slot and form factor does the POSIFLEX EK-2150 need to accept this 260-pin upgrade?

The system must provide a DDR4 SO-DIMM socket that supports 260-pin unbuffered non-ECC modules at PC4-25600 speed.

Will this CL22 3200 MT/s stick run stably alongside any existing memory already installed in the EK-2150?

It is validated for the POSIFLEX EK-2150 Mercury Series kiosk and uses major OEM chips for broad compatibility with factory-installed DDR4.

同類商品

顧客也比較過

同一分類，同一套結帳流程 — 支援八種加密貨幣，匯率鎖定 30 分鐘。