Elfogadjuk a kriptovalutát — így az Ön birtokában lévő érmékből valódi hardvert vásárolhat.Fizessen kriptóval, és költse el valódi hardverre. 399 $ felett világszerte díjmentes a biztosított szállítás. Egyszerű, jelöletlen külső kartonok, Németországból küldve.399 $ felett díjmentes a biztosított szállítás. Az Ön árfolyama a pénztár megnyitásától számított 30 percre zárolva marad.Árfolyam zárolva 30 percre. Minden termék gyárilag zárt, sorozatszáma ellenőrzött, és 24 hónapos garancia fedezi.Zárt csomagolás, 24 hónap garancia.

Árfigyelő lista Bejelentkezés
Two green DDR5 RDIMM sticks without heat spreaders

NEMIX RAM

NEMIX RAM 96GB (2x48GB) DDR5-5600 ECC RDIMM CL46 1.1V GIGABYTE MZ33-CP1 memory upgrade

SKU CH-XRPH-PBN8R

96GB DDR5-5600 ECC registered server memory kit in two 48GB modules at 1.1V CL46, validated for the GIGABYTE MZ33-CP1 motherboard

  • Capacity96GB (2 x 48GB)
  • Type288-Pin DDR5 RDIMM
  • SpeedDDR5 5600 (PC5 44800)
  • CAS LatencyCL46
  • Voltage1.10V
  • ECCYes

Size 96GB 2X48GB

Még 24 konfiguráció megtekintése
  • 96 GB capacity from two 48 GB modules for maximum server density
  • DDR5 5600 speed with CL46 timing delivers rated throughput on the MZ33-CP1
  • Registered ECC architecture offloads the controller and corrects single-bit errors
  • 1 V operation matches the board's memory-controller specification exactly
  • 288-pin RDIMM form factor fits the required slot type without adapters

Exact-match 96 GB DDR5-5600 ECC kit

This 96 GB kit contains two 48 GB DDR5-5600 Registered ECC RDIMMs built for the GIGABYTE MZ33-CP1 motherboard. Each module runs at 1.1 V with CL46 timing and a 2Rx8 rank structure the platform expects. Registered buffering and on-die ECC protect data integrity in multi-slot server configurations.

288-pin RDIMM form factor for populated slots

The 288-pin Registered DIMM form factor matches the board's DDR5 memory slots and population rules, allowing every supported slot to be filled without down-clocking. No heat spreader is fitted, so clearance inside dense 1U or 2U chassis is maximised. Verify the manual for approved DIMM order before installation.

Registered ECC stability under sustained load

Registered architecture offloads the memory controller so all slots operate at rated speed during continuous workloads. ECC corrects single-bit errors on the fly, preventing silent data corruption and unplanned reboots in production environments. Lifetime replacement coverage and US-based technical support back the modules.

Erősségek

  • 96 GB capacity from two 48 GB modules for maximum server density
  • DDR5 5600 speed with CL46 timing delivers rated throughput on the MZ33-CP1
  • Registered ECC architecture offloads the controller and corrects single-bit errors
  • 1 V operation matches the board's memory-controller specification exactly
  • 288-pin RDIMM form factor fits the required slot type without adapters

Műszaki adatok

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Server Memory
ModelDDR5 ECC RDIMM Registered Server Memory
Part NumberMR44800-4828K2
Capacity96GB (2 x 48GB)
Type288-Pin DDR5 RDIMM
SpeedDDR5 5600 (PC5 44800)
CAS LatencyCL46
Voltage1.10V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx8
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemGIGABYTE
FeaturesDDR5 ECC RDIMM Motherboard Compatible
Package Content96GB 2X48GB DDR5 5600MHz PC5-44800 2Rx8 1.1V 288-PIN ECC RDIMM KIT

A modell további verziói

5 további ebben a termékcsaládban

Ugyanaz a termékcsalád, eltérő memória, hűtés vagy órajel — hasonlítsa össze, mielőtt dönt.

Kérdések a termékről

Will the 2Rx8 registered ECC design let all slots run at DDR5-5600 when fully populated on the MZ33-CP1?

The registered architecture offloads the memory controller so every slot runs fully populated at full capacity, keeping the rated 5600 MT/s across the 96 GB kit.

What thermal or power characteristics should I expect from these 1.1 V RDIMMs in continuous use?

Operating at 1.1 V with no heat spreader, the modules draw minimal power and rely on chassis airflow; registered buffering reduces electrical load on the motherboard during sustained workloads.

Which motherboard and memory population rules must I verify before installing this 2x48 GB kit?

The kit is validated for the GIGABYTE MZ33-CP1; consult that board's manual for supported capacities, approved DIMM population order, and installation steps before purchase.

Szintén ezen a polcon

Vásárlók ezeket hasonlították össze

Ugyanaz a polc, ugyanaz a pénztár — nyolc pénznem és 30 perces árfolyamzár.