Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.

Seuratut tuotteet Kirjaudu sisään
Two green DDR5 RDIMM sticks without heat spreaders

NEMIX RAM

NEMIX RAM 96GB (2x48GB) DDR5-5600 ECC RDIMM CL46 1.1V GIGABYTE MZ33-CP1 memory upgrade

SKU CH-XRPH-PBN8R

96GB DDR5-5600 ECC registered server memory kit in two 48GB modules at 1.1V CL46, validated for the GIGABYTE MZ33-CP1 motherboard

  • Capacity96GB (2 x 48GB)
  • Type288-Pin DDR5 RDIMM
  • SpeedDDR5 5600 (PC5 44800)
  • CAS LatencyCL46
  • Voltage1.10V
  • ECCYes

Size 96GB 2X48GB

Näytä 24 muuta kokoonpanoa
  • 96 GB capacity from two 48 GB modules for maximum server density
  • DDR5 5600 speed with CL46 timing delivers rated throughput on the MZ33-CP1
  • Registered ECC architecture offloads the controller and corrects single-bit errors
  • 1 V operation matches the board's memory-controller specification exactly
  • 288-pin RDIMM form factor fits the required slot type without adapters

Exact-match 96 GB DDR5-5600 ECC kit

This 96 GB kit contains two 48 GB DDR5-5600 Registered ECC RDIMMs built for the GIGABYTE MZ33-CP1 motherboard. Each module runs at 1.1 V with CL46 timing and a 2Rx8 rank structure the platform expects. Registered buffering and on-die ECC protect data integrity in multi-slot server configurations.

288-pin RDIMM form factor for populated slots

The 288-pin Registered DIMM form factor matches the board's DDR5 memory slots and population rules, allowing every supported slot to be filled without down-clocking. No heat spreader is fitted, so clearance inside dense 1U or 2U chassis is maximised. Verify the manual for approved DIMM order before installation.

Registered ECC stability under sustained load

Registered architecture offloads the memory controller so all slots operate at rated speed during continuous workloads. ECC corrects single-bit errors on the fly, preventing silent data corruption and unplanned reboots in production environments. Lifetime replacement coverage and US-based technical support back the modules.

Kohokohdat

  • 96 GB capacity from two 48 GB modules for maximum server density
  • DDR5 5600 speed with CL46 timing delivers rated throughput on the MZ33-CP1
  • Registered ECC architecture offloads the controller and corrects single-bit errors
  • 1 V operation matches the board's memory-controller specification exactly
  • 288-pin RDIMM form factor fits the required slot type without adapters

Tekniset tiedot

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Server Memory
ModelDDR5 ECC RDIMM Registered Server Memory
Part NumberMR44800-4828K2
Capacity96GB (2 x 48GB)
Type288-Pin DDR5 RDIMM
SpeedDDR5 5600 (PC5 44800)
CAS LatencyCL46
Voltage1.10V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx8
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemGIGABYTE
FeaturesDDR5 ECC RDIMM Motherboard Compatible
Package Content96GB 2X48GB DDR5 5600MHz PC5-44800 2Rx8 1.1V 288-PIN ECC RDIMM KIT

Tämän mallin muut versiot

5 lisää samasta mallistosta

Sama tuoteperhe, eri muisti, jäähdytin tai kellotaajuus — vertaile ennen päätöstä.

Kysymyksiä tästä tuotteesta

Will the 2Rx8 registered ECC design let all slots run at DDR5-5600 when fully populated on the MZ33-CP1?

The registered architecture offloads the memory controller so every slot runs fully populated at full capacity, keeping the rated 5600 MT/s across the 96 GB kit.

What thermal or power characteristics should I expect from these 1.1 V RDIMMs in continuous use?

Operating at 1.1 V with no heat spreader, the modules draw minimal power and rely on chassis airflow; registered buffering reduces electrical load on the motherboard during sustained workloads.

Which motherboard and memory population rules must I verify before installing this 2x48 GB kit?

The kit is validated for the GIGABYTE MZ33-CP1; consult that board's manual for supported capacities, approved DIMM population order, and installation steps before purchase.

Myös tällä osastolla

Asiakkaat vertailivat myös näitä

Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.