Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.

Seuratut tuotteet Kirjaudu sisään
Twelve green DDR5 RDIMM sticks in a row, black chips, no heat spreaders

NEMIX RAM

NEMIX RAM DDR5 ECC RDIMM 1.5TB 12x128GB 4800MHz CL40 1.1V 2Rx4 Supermicro H13SSW

SKU CH-17FK-MJHPJ

A 1.5 TB DDR5 ECC registered RDIMM kit of twelve 128 GB modules at 4800 MHz CL40 1.1 V 2Rx4, validated for the Supermicro H13SSW motherboard

  • Capacity1.5TB (12 x 128GB)
  • Type288-Pin DDR5 RDIMM
  • SpeedDDR5 4800 (PC5 38400)
  • CAS LatencyCL40
  • Voltage1.10V
  • ECCYes

Size 1.5TB 12X128GB

Näytä 24 muuta kokoonpanoa
  • Massive 1.5 TB capacity from twelve 128 GB modules for memory-hungry workloads
  • DDR5-4800 speed with CL40 latency delivers rated throughput on supported platforms
  • Registered ECC architecture corrects single-bit errors to protect data integrity
  • 1 V operation reduces power draw per module in dense configurations
  • Verified 288-pin RDIMM fitment for Supermicro H13SSW motherboard population rules

Exact-match server upgrade

This NEMIX RAM kit provides 1.5 TB of DDR5 capacity across twelve 128 GB registered ECC modules. It is built for administrators expanding a Supermicro H13SSW motherboard to its full memory ceiling. The 2Rx4 organization and 1.10 V operation match the board's native memory-controller expectations.

Sustained-load stability

Registered buffering offloads the memory controller so all twelve slots run fully populated at the rated 4800 MT/s without throttling. On-die ECC corrects single-bit errors in real time, preventing silent data corruption during continuous compute or database workloads. The CL40 timing is maintained across the full kit under prolonged thermal stress.

Twelve-module population rule

The H13SSW requires a specific 12 x 128 GB population order to recognise the full 1.5 TB at DDR5-4800. Builders who cannot populate all twelve slots in the prescribed sequence will not achieve the rated capacity or speed.

Kohokohdat

  • Massive 1.5 TB capacity from twelve 128 GB modules for memory-hungry workloads
  • DDR5-4800 speed with CL40 latency delivers rated throughput on supported platforms
  • Registered ECC architecture corrects single-bit errors to protect data integrity
  • 1 V operation reduces power draw per module in dense configurations
  • Verified 288-pin RDIMM fitment for Supermicro H13SSW motherboard population rules

Tekniset tiedot

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Server Memory
ModelDDR5 ECC RDIMM Registered Server Memory
Part NumberMR38400-724K12
Capacity1.5TB (12 x 128GB)
Type288-Pin DDR5 RDIMM
SpeedDDR5 4800 (PC5 38400)
CAS LatencyCL40
Voltage1.10V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx4
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemSupermicro
FeaturesDDR5 ECC RDIMM Motherboard Compatible
Package Content1.5TB 12X128GB DDR5 4800MHz PC5-38400 2Rx4 1.1V 288-PIN ECC RDIMM KIT

Tämän mallin muut versiot

5 lisää samasta mallistosta

Sama tuoteperhe, eri muisti, jäähdytin tai kellotaajuus — vertaile ennen päätöstä.

Kysymyksiä tästä tuotteesta

How much heat does the 1.1V DDR5-4800 CL40 2Rx4 registered kit generate when running all day?

Each 128 GB module operates at 1.10 V DDR5 standard voltage. Registered buffering and the absence of a heat spreader mean thermal output is in line with typical enterprise RDIMMs; ensure your server chassis provides the airflow the motherboard manual specifies.

What motherboard and CPU combination must I already own for this 1.5 TB 12×128 GB kit to work?

The kit is validated for the Supermicro H13SSW motherboard. You need that board with a compatible processor that supports 12 DDR5 RDIMM slots, registered ECC memory, and 2Rx4 population rules at DDR5-4800.

Can I keep existing DDR5 RDIMMs of different capacity or rank in the other slots of the H13SSW while adding this 2Rx4 128 GB kit?

The H13SSW requires matched population per channel. Mixing ranks or capacities can prevent full-speed operation or cause the system to down-clock; consult the board manual for approved DIMM configurations before mixing.

Myös tällä osastolla

Asiakkaat vertailivat myös näitä

Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.