Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.

Seuratut tuotteet Kirjaudu sisään
Green rectangular DDR5 memory module with gold contacts and black chips, no heat spreader

NEMIX RAM

NEMIX RAM 48GB DDR5 4800 CL40 2Rx8 ECC Registered RDIMM Supermicro H13SSL-N memory upgrade

SKU CH-JNAY-9BXDQ

48 GB DDR5 4800 CL40 2Rx8 registered ECC RDIMM validated for Supermicro H13SSL-N servers

  • Capacity48GB
  • Type288-Pin DDR5 RDIMM
  • SpeedDDR5 4800 (PC5 38400)
  • CAS LatencyCL40
  • Voltage1.10V
  • ECCYes

Size 48GB

Näytä 24 muuta kokoonpanoa
  • 48 GB capacity lets you run larger workloads in a single module
  • DDR5-4800 speed rated at PC5-38400 delivers rated throughput
  • CL40 latency with 1.1 V operation matches the controller specification
  • 2Rx8 registered ECC design offloads the memory controller and corrects single-bit errors
  • 288-pin RDIMM form factor verified for the Supermicro H13SSL-N motherboard

Exact-fit DDR5 RDIMM for Supermicro H13SSL-N

This 48GB DDR5 4800 CL40 registered ECC module is built to the precise rank, voltage and timing the Supermicro H13SSL-N memory controller expects. The 2Rx8 288-pin RDIMM operates at 1.1V and runs at its rated speed when installed in a compatible server.

Who this suits and who should look elsewhere

Designed for administrators upgrading a Supermicro H13SSL-N motherboard that requires registered ECC DDR5 RDIMMs with a 2Rx8 organisation. Builders needing unbuffered UDIMMs, SODIMMs, non-ECC memory or a different capacity or speed should select another module.

Installation ease and common issues

The 288-pin RDIMM seats in the standard DDR5 server slot; no heat spreader is fitted, so clearance is minimal. Common issues include ignoring the motherboard's population order, mixing ranks or voltages, and forgetting to enable ECC in the BIOS. Consult the system manual for the approved DIMM sequence before installation.

Kohokohdat

  • 48 GB capacity lets you run larger workloads in a single module
  • DDR5-4800 speed rated at PC5-38400 delivers rated throughput
  • CL40 latency with 1.1 V operation matches the controller specification
  • 2Rx8 registered ECC design offloads the memory controller and corrects single-bit errors
  • 288-pin RDIMM form factor verified for the Supermicro H13SSL-N motherboard

Tekniset tiedot

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Server Memory
ModelDDR5 ECC RDIMM Registered Server Memory
Part NumberMR38400-4828K1
Capacity48GB
Type288-Pin DDR5 RDIMM
SpeedDDR5 4800 (PC5 38400)
CAS LatencyCL40
Voltage1.10V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx8
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemSupermicro
FeaturesDDR5 ECC RDIMM Motherboard Compatible
Package Content48GB DDR5 4800MHz PC5-38400 2Rx8 1.1V 288-PIN ECC RDIMM KIT

Tämän mallin muut versiot

5 lisää samasta mallistosta

Sama tuoteperhe, eri muisti, jäähdytin tai kellotaajuus — vertaile ennen päätöstä.

Kysymyksiä tästä tuotteesta

What motherboard must I already have for this 48GB DDR5 4800 CL40 2Rx8 ECC Registered RDIMM to work?

This module is verified for the Supermicro H13SSL-N motherboard. It uses the 288-pin RDIMM form factor that board requires, so it fits the correct slots and follows the board's population rules.

Can I keep my existing DDR5 4800 Registered ECC modules and add this 48GB 2Rx8 kit alongside them?

Yes, provided the other modules are also DDR5 4800 Registered ECC. The memory controller will run all populated slots at the lowest common speed and timing, so matching voltage (1.1V) and registered architecture keeps the system stable.

How can I confirm the 48GB DDR5 4800 CL40 kit is running at its rated speed after installation?

Enter the system BIOS or UEFI and check the memory information screen; it should report 4800 MT/s (PC5-38400), CL40 latency, 1.1V voltage, and the full 48GB capacity per module.

Myös tällä osastolla

Asiakkaat vertailivat myös näitä

Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.