Elfogadjuk a kriptovalutát — így az Ön birtokában lévő érmékből valódi hardvert vásárolhat.Fizessen kriptóval, és költse el valódi hardverre. 399 $ felett világszerte díjmentes a biztosított szállítás. Egyszerű, jelöletlen külső kartonok, Németországból küldve.399 $ felett díjmentes a biztosított szállítás. Az Ön árfolyama a pénztár megnyitásától számított 30 percre zárolva marad.Árfolyam zárolva 30 percre. Minden termék gyárilag zárt, sorozatszáma ellenőrzött, és 24 hónapos garancia fedezi.Zárt csomagolás, 24 hónap garancia.

Árfigyelő lista Bejelentkezés
Two green DDR5 SODIMM modules side by side

NEMIX RAM

NEMIX RAM CSE-E302iL3 64GB (2x32GB) DDR5 4800 memory upgrade

SKU CH-109R-TT7M9 MPN CSE-E302iL3

A 64 GB DDR5 4800 SODIMM kit built for Supermicro IoT SuperServer SYS-E302-13AD systems

  • Capacity64GB (2 x 32GB)
  • SpeedDDR5 4800 (PC5 38400)
  • ECCNo
  • Buffered/RegisteredUnbuffered
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • Voltage1.10V
  • 64 GB capacity expands server memory headroom
  • DDR5 4800 speed matches platform specification
  • 2 x 32 GB dual-rank modules populate two slots
  • 1 V operation reduces power draw
  • 262-pin SODIMM form factor fits Supermicro IoT SuperServer SYS-E302-13AD

System-specific DDR5 SODIMM kit

This NEMIX RAM kit delivers 64GB of DDR5 memory in a matched pair of 32GB modules. It is built for the SuperMicro IoT SuperServer SYS-E302-13AD and X13SAV-PS motherboard. The unbuffered non-ECC design suits embedded and edge deployments that need capacity without registered DIMM overhead.

Fits SuperMicro E302 platforms only

Engineers upgrading the specified SuperServer model can install this 262-pin SODIMM pair directly. Buyers who need ECC error correction or registered buffering for data-integrity workloads should look elsewhere. Systems requiring a different pin count, voltage, or form factor cannot use these modules.

Sustained-load behaviour at 1.1V

Rated at 4800 MT/s with CL40 latency, the dual-rank 2Rx8 organisation feeds both channels evenly during long compute runs. The 1.10V operating voltage keeps power draw predictable inside fanless or thermally constrained chassis. Continuous stress testing by the supplier verifies stability at the rated speed without throttling.

Erősségek

  • 64 GB capacity expands server memory headroom
  • DDR5 4800 speed matches platform specification
  • 2 x 32 GB dual-rank modules populate two slots
  • 1 V operation reduces power draw
  • 262-pin SODIMM form factor fits Supermicro IoT SuperServer SYS-E302-13AD

Műszaki adatok

BrandNEMIX RAM
SeriesSuperMicro Server/Workstation Compatible Series Memory
ModelSuperMicro DDR5 4800MHZ Non-ECC Unbuffered SODIMM
Part NumberMS38400-328K2
Capacity64GB (2 x 32GB)
SpeedDDR5 4800 (PC5 38400)
ECCNo
Buffered/RegisteredUnbuffered
ChipsetMajor OEM Samsung, Micron, Hynix
Voltage1.10V
Compatible SystemSupermicro
CAS LatencyCL40
Heat SpreaderNo
Type262-Pin DDR5 SODIMM
Rank2Rx8
FeaturesDDR5 Non-ECC Unbuffered SODIMM Motherboard Compatible
Package Content64GB (2X32GB) DDR5 4800MHZ PC5-38400 2Rx8 1.1V 262-PIN Non-ECC Unbuffered SODIMM KIT

Kérdések a termékről

Does my SuperMicro SYS-E302-13AD have the 262-pin DDR5 SODIMM slots this kit requires?

This kit uses 262-pin DDR5 SODIMM modules, which are the exact form factor specified for the SuperMicro SYS-E302-13AD and X13SAV-PS motherboard.

Will the 1.10V operating voltage and CL40 timing match the memory controller on the X13SAV-PS motherboard?

The modules run at the standard DDR5 4800 speed with 1.10V and CL40 latency, matching the JEDEC baseline the X13SAV-PS memory controller expects.

After installation, how can I confirm both 32GB modules are running at 4800 MT/s in dual-channel mode?

Check the BIOS memory information or run a system utility such as CPU-Z; it should report 64GB total, 4800 MT/s data rate, and dual-channel operation.

Szintén ezen a polcon

Vásárlók ezeket hasonlították össze

Ugyanaz a polc, ugyanaz a pénztár — nyolc pénznem és 30 perces árfolyamzár.