NEMIX RAM
NEMIX RAM CSE-E302iL3 64GB (2x32GB) DDR5 4800 memory upgrade
A 64 GB DDR5 4800 SODIMM kit built for Supermicro IoT SuperServer SYS-E302-13AD systems
- Capacity64GB (2 x 32GB)
- SpeedDDR5 4800 (PC5 38400)
- ECCNo
- Buffered/RegisteredUnbuffered
- ChipsetMajor OEM Samsung, Micron, Hynix
- Voltage1.10V
- 64 GB capacity expands server memory headroom
- DDR5 4800 speed matches platform specification
- 2 x 32 GB dual-rank modules populate two slots
- 1 V operation reduces power draw
- 262-pin SODIMM form factor fits Supermicro IoT SuperServer SYS-E302-13AD
System-specific DDR5 SODIMM kit
This NEMIX RAM kit delivers 64GB of DDR5 memory in a matched pair of 32GB modules. It is built for the SuperMicro IoT SuperServer SYS-E302-13AD and X13SAV-PS motherboard. The unbuffered non-ECC design suits embedded and edge deployments that need capacity without registered DIMM overhead.
Fits SuperMicro E302 platforms only
Engineers upgrading the specified SuperServer model can install this 262-pin SODIMM pair directly. Buyers who need ECC error correction or registered buffering for data-integrity workloads should look elsewhere. Systems requiring a different pin count, voltage, or form factor cannot use these modules.
Sustained-load behaviour at 1.1V
Rated at 4800 MT/s with CL40 latency, the dual-rank 2Rx8 organisation feeds both channels evenly during long compute runs. The 1.10V operating voltage keeps power draw predictable inside fanless or thermally constrained chassis. Continuous stress testing by the supplier verifies stability at the rated speed without throttling.
Puntos fuertes
- 64 GB capacity expands server memory headroom
- DDR5 4800 speed matches platform specification
- 2 x 32 GB dual-rank modules populate two slots
- 1 V operation reduces power draw
- 262-pin SODIMM form factor fits Supermicro IoT SuperServer SYS-E302-13AD
Especificaciones
| Brand | NEMIX RAM |
|---|---|
| Series | SuperMicro Server/Workstation Compatible Series Memory |
| Model | SuperMicro DDR5 4800MHZ Non-ECC Unbuffered SODIMM |
| Part Number | MS38400-328K2 |
| Capacity | 64GB (2 x 32GB) |
| Speed | DDR5 4800 (PC5 38400) |
| ECC | No |
| Buffered/Registered | Unbuffered |
| Chipset | Major OEM Samsung, Micron, Hynix |
| Voltage | 1.10V |
| Compatible System | Supermicro |
| CAS Latency | CL40 |
| Heat Spreader | No |
| Type | 262-Pin DDR5 SODIMM |
| Rank | 2Rx8 |
| Features | DDR5 Non-ECC Unbuffered SODIMM Motherboard Compatible |
| Package Content | 64GB (2X32GB) DDR5 4800MHZ PC5-38400 2Rx8 1.1V 262-PIN Non-ECC Unbuffered SODIMM KIT |
Preguntas sobre este artículo
Does my SuperMicro SYS-E302-13AD have the 262-pin DDR5 SODIMM slots this kit requires?
This kit uses 262-pin DDR5 SODIMM modules, which are the exact form factor specified for the SuperMicro SYS-E302-13AD and X13SAV-PS motherboard.
Will the 1.10V operating voltage and CL40 timing match the memory controller on the X13SAV-PS motherboard?
The modules run at the standard DDR5 4800 speed with 1.10V and CL40 latency, matching the JEDEC baseline the X13SAV-PS memory controller expects.
After installation, how can I confirm both 32GB modules are running at 4800 MT/s in dual-channel mode?
Check the BIOS memory information or run a system utility such as CPU-Z; it should report 64GB total, 4800 MT/s data rate, and dual-channel operation.
También en este pasillo
Los clientes también compararon
Mismo estante, mismo pago — ocho criptomonedas y un tipo de cambio fijado 30 minutos.



