Elfogadjuk a kriptovalutát — így az Ön birtokában lévő érmékből valódi hardvert vásárolhat.Fizessen kriptóval, és költse el valódi hardverre. 399 $ felett világszerte díjmentes a biztosított szállítás. Egyszerű, jelöletlen külső kartonok, Németországból küldve.399 $ felett díjmentes a biztosított szállítás. Az Ön árfolyama a pénztár megnyitásától számított 30 percre zárolva marad.Árfolyam zárolva 30 percre. Minden termék gyárilag zárt, sorozatszáma ellenőrzött, és 24 hónapos garancia fedezi.Zárt csomagolás, 24 hónap garancia.

Árfigyelő lista Bejelentkezés

NEMIX RAM

NEMIX RAM DDR5 256GB (4x64GB) 4800MHz ECC RDIMM Supermicro H14DST-F

SKU CH-K0WG-ZV61A

A 256 GB (4 × 64 GB) DDR5-4800 ECC registered RDIMM kit at 1.1 V, CL40, validated for the Supermicro H14DST-F motherboard

  • Capacity256GB (4 x 64GB)
  • Type288-Pin DDR5 RDIMM
  • SpeedDDR5 4800 (PC5 38400)
  • CAS LatencyCL40
  • Voltage1.10V
  • ECCYes
  • 256 GB total capacity from four 64 GB modules
  • DDR5-4800 speed with CL40 latency for rated throughput
  • Registered ECC design offloads the controller and corrects single-bit errors
  • 1 V operation matches the platform's voltage requirement
  • Verified fit for Supermicro H14DST-F motherboard

Server Memory Kit

This 256GB kit contains four 64GB DDR5 registered DIMMs built for the Supermicro H14DST-F motherboard. Each module runs at 4800MHz with CL40 latency at 1.1V. The 2Rx4 organisation and ECC registration match the board's memory controller requirements exactly.

Registered ECC Architecture

Registered buffering reduces electrical load on the memory controller when all slots are populated. On-die ECC detects and corrects single-bit errors automatically, preventing silent data corruption and unplanned reboots in production workloads. The modules operate at the standard 1.1V DDR5 voltage.

288-Pin RDIMM Form Factor

The 288-pin registered DIMM form factor is the only type the H14DST-F accepts; UDIMM or SODIMM modules will not fit. No heat spreaders are fitted, so airflow clearance follows the motherboard's standard DIMM spacing. Verify the board's population order in its manual before installation.

Erősségek

  • 256 GB total capacity from four 64 GB modules
  • DDR5-4800 speed with CL40 latency for rated throughput
  • Registered ECC design offloads the controller and corrects single-bit errors
  • 1 V operation matches the platform's voltage requirement
  • Verified fit for Supermicro H14DST-F motherboard

Műszaki adatok

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Server Memory
ModelDDR5 ECC RDIMM Registered Server Memory
Part NumberMR38400-924K4
Capacity256GB (4 x 64GB)
Type288-Pin DDR5 RDIMM
SpeedDDR5 4800 (PC5 38400)
CAS LatencyCL40
Voltage1.10V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx4
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemSupermicro
FeaturesDDR5 ECC RDIMM Motherboard Compatible
Package Content256GB 4X64GB DDR5 4800MHz PC5-38400 2Rx4 1.1V 288-PIN ECC RDIMM KIT

A modell további verziói

5 további ebben a termékcsaládban

Ugyanaz a termékcsalád, eltérő memória, hűtés vagy órajel — hasonlítsa össze, mielőtt dönt.

Kérdések a termékről

Will the 4x64GB DDR5 RDIMM kit need any firmware updates or component swaps after installation?

The modules are an exact-match upgrade for the Supermicro H14DST-F, so the memory controller recognises the 2Rx4 rank, 1.10V voltage and CL40 timing at full 4800MHz speed without further changes.

What limit appears first when the 256GB kit runs at DDR5-4800 continuously?

The registered (buffered) architecture offloads the memory controller, allowing every slot to stay fully populated at rated capacity and speed under sustained load.

How much heat and power do the four 64GB DDR5 RDIMMs produce during all-day operation?

Each module runs at 1.10V with no heat spreader; the registered design reduces electrical load on the controller, keeping power draw and thermals low for continuous server use.

Szintén ezen a polcon

Vásárlók ezeket hasonlították össze

Ugyanaz a polc, ugyanaz a pénztár — nyolc pénznem és 30 perces árfolyamzár.