Elfogadjuk a kriptovalutát — így az Ön birtokában lévő érmékből valódi hardvert vásárolhat.Fizessen kriptóval, és költse el valódi hardverre. 399 $ felett világszerte díjmentes a biztosított szállítás. Egyszerű, jelöletlen külső kartonok, Németországból küldve.399 $ felett díjmentes a biztosított szállítás. Az Ön árfolyama a pénztár megnyitásától számított 30 percre zárolva marad.Árfolyam zárolva 30 percre. Minden termék gyárilag zárt, sorozatszáma ellenőrzött, és 24 hónapos garancia fedezi.Zárt csomagolás, 24 hónap garancia.

Árfigyelő lista Bejelentkezés
Eight green DDR5 RDIMM modules in a row

NEMIX RAM

NEMIX RAM DDR5 5600 ECC RDIMM 128GB 8x16GB CL46 1.1V Supermicro H13SSF memory upgrade

SKU CH-P6KT-80BDM

128 GB DDR5 5600 ECC registered RDIMM kit of eight 16 GB modules at CL46 and 1.1 V for the Supermicro H13SSF motherboard

  • Capacity128GB (8 x 16GB)
  • Type288-Pin DDR5 RDIMM
  • SpeedDDR5 5600 (PC5 44800)
  • CAS LatencyCL46
  • Voltage1.10V
  • ECCYes
  • 128GB kit fills eight slots for maximum server capacity
  • DDR5 5600 speed matches board spec for rated performance
  • Registered ECC design corrects single-bit errors to prevent data corruption
  • 1V operation meets platform voltage requirement for stable operation
  • CL46 latency and 1Rx8 rank align with memory controller expectations

Exact-match server kit

This NEMIX RAM kit delivers 128GB of DDR5 memory across eight 16GB registered DIMMs. It is built for administrators upgrading a Supermicro H13SSF motherboard that requires DDR5-5600 RDIMMs with ECC.

Registered ECC stability

Each module uses a 288-pin RDIMM form factor with 1Rx8 organisation and runs at 1.1V CL46. The registered buffer reduces electrical load on the memory controller when all slots are populated, while on-die ECC corrects single-bit errors before they affect workloads.

Replaces partial or slower sets

The kit replaces smaller-capacity or lower-speed DDR5 RDIMMs when the board's population rules allow eight modules at full frequency. It is not for systems limited to fewer slots, UDIMM-only platforms, or builds that need a different voltage or latency profile.

Erősségek

  • 128GB kit fills eight slots for maximum server capacity
  • DDR5 5600 speed matches board spec for rated performance
  • Registered ECC design corrects single-bit errors to prevent data corruption
  • 1V operation meets platform voltage requirement for stable operation
  • CL46 latency and 1Rx8 rank align with memory controller expectations

Műszaki adatok

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Server Memory
ModelDDR5 ECC RDIMM Registered Server Memory
Part NumberMR44800-618K8
Capacity128GB (8 x 16GB)
Type288-Pin DDR5 RDIMM
SpeedDDR5 5600 (PC5 44800)
CAS LatencyCL46
Voltage1.10V
ECCYes
Buffered/RegisteredRegistered
Rank1Rx8
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemSupermicro
FeaturesDDR5 ECC RDIMM Motherboard Compatible
Package Content128GB 8X16GB DDR5 5600MHz PC5-44800 1Rx8 1.1V 288-PIN ECC RDIMM KIT

Kérdések a termékről

What speed does the DDR5 5600 interface actually run at on the Supermicro H13SSF?

The kit is rated DDR5 5600 (PC5-44800) and will operate at that speed when the motherboard memory controller is configured for DDR5-5600.

What physical slot and form factor do these modules need on the H13SSF?

Each 16 GB module is a 288-pin RDIMM; the board requires registered DIMMs, not UDIMM or SODIMM, and all eight slots must accept this form factor.

How are the eight DIMMs installed and which step is often missed?

Populate the eight slots in the exact order shown in the Supermicro H13SSF manual; the common mistake is skipping the prescribed population sequence, which prevents full 128 GB recognition.

Szintén ezen a polcon

Vásárlók ezeket hasonlították össze

Ugyanaz a polc, ugyanaz a pénztár — nyolc pénznem és 30 perces árfolyamzár.