BFKK
BFKK 3U Rackmount Server Chassis EATX/ATX/MATX 4x5.25 6x3.5 Top/Side Cooling
- Rackmount
214,99 USD
0.0027634BTC
Skladom
NEMIX RAM
NEMIX RAM DDR5 5600 ECC RDIMM 128GB 8x16GB CL46 1.1V Supermicro H13SSF memory upgrade
128 GB DDR5 5600 ECC registered RDIMM kit of eight 16 GB modules at CL46 and 1.1 V for the Supermicro H13SSF motherboard
- Capacity128GB (8 x 16GB)
- Type288-Pin DDR5 RDIMM
- SpeedDDR5 5600 (PC5 44800)
- CAS LatencyCL46
- Voltage1.10V
- ECCYes
- 128GB kit fills eight slots for maximum server capacity
- DDR5 5600 speed matches board spec for rated performance
- Registered ECC design corrects single-bit errors to prevent data corruption
- 1V operation meets platform voltage requirement for stable operation
- CL46 latency and 1Rx8 rank align with memory controller expectations
Exact-match server kit
This NEMIX RAM kit delivers 128GB of DDR5 memory across eight 16GB registered DIMMs. It is built for administrators upgrading a Supermicro H13SSF motherboard that requires DDR5-5600 RDIMMs with ECC.
Registered ECC stability
Each module uses a 288-pin RDIMM form factor with 1Rx8 organisation and runs at 1.1V CL46. The registered buffer reduces electrical load on the memory controller when all slots are populated, while on-die ECC corrects single-bit errors before they affect workloads.
Replaces partial or slower sets
The kit replaces smaller-capacity or lower-speed DDR5 RDIMMs when the board's population rules allow eight modules at full frequency. It is not for systems limited to fewer slots, UDIMM-only platforms, or builds that need a different voltage or latency profile.
Prednosti
- 128GB kit fills eight slots for maximum server capacity
- DDR5 5600 speed matches board spec for rated performance
- Registered ECC design corrects single-bit errors to prevent data corruption
- 1V operation meets platform voltage requirement for stable operation
- CL46 latency and 1Rx8 rank align with memory controller expectations
Špecifikácie
| Brand | NEMIX RAM |
|---|---|
| Series | NEMIX RAM Original Series Server Memory |
| Model | DDR5 ECC RDIMM Registered Server Memory |
| Part Number | MR44800-618K8 |
| Capacity | 128GB (8 x 16GB) |
| Type | 288-Pin DDR5 RDIMM |
| Speed | DDR5 5600 (PC5 44800) |
| CAS Latency | CL46 |
| Voltage | 1.10V |
| ECC | Yes |
| Buffered/Registered | Registered |
| Rank | 1Rx8 |
| Chipset | Major OEM Samsung, Micron, Hynix |
| Heat Spreader | No |
| Compatible System | Supermicro |
| Features | DDR5 ECC RDIMM Motherboard Compatible |
| Package Content | 128GB 8X16GB DDR5 5600MHz PC5-44800 1Rx8 1.1V 288-PIN ECC RDIMM KIT |
Otázky k tomuto produktu
What speed does the DDR5 5600 interface actually run at on the Supermicro H13SSF?
The kit is rated DDR5 5600 (PC5-44800) and will operate at that speed when the motherboard memory controller is configured for DDR5-5600.
What physical slot and form factor do these modules need on the H13SSF?
Each 16 GB module is a 288-pin RDIMM; the board requires registered DIMMs, not UDIMM or SODIMM, and all eight slots must accept this form factor.
How are the eight DIMMs installed and which step is often missed?
Populate the eight slots in the exact order shown in the Supermicro H13SSF manual; the common mistake is skipping the prescribed population sequence, which prevents full 128 GB recognition.
Aj v tomto oddelení
Zákazníci tiež porovnávali
Rovnaké oddelenie, rovnaká pokladňa — osem mien a kurz zablokovaný na 30 minút.
